Am Donnerstag, 11. September 2014, 22:18:17 schrieb Maxime Ripard:
> The current phase API doesn't look into the actual hardware to get the phase
> value, but will rather get it from a variable only set by the set_phase
> function.
>
> This will cause issue when the client driver will never call the set_phase
> function, where we can end up having a reported phase that will not match
> what the hardware has been programmed to by the bootloader or what phase is
> programmed out of reset.
>
> Add a new get_phase function for the drivers to implement so that we can get
> this value.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
> drivers/clk/clk.c | 10 ++++++++++
> include/linux/clk-provider.h | 5 +++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index d87661af0c72..113d75db371d 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1934,6 +1934,16 @@ int __clk_init(struct device *dev, struct clk *clk)
> clk->accuracy = 0;
>
> /*
> + * Set clk's phase.
> + * Since a phase is by definition relative to its parent, just
> + * query the current clock phase, or just assume it's in phase.
> + */
> + if (clk->ops->get_phase)
> + clk->phase = clk->ops->get_phase(clk->hw);
> + else
> + clk->phase = 0;
> +
> + /*
> * Set clk's rate. The preferred method is to use .recalc_rate. For
> * simple clocks and lazy developers the default fallback is to use the
> * parent's rate. If a clock doesn't have a parent (or is orphaned)
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 69b20d4c1e1a..abec961092a7 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -130,6 +130,10 @@ struct dentry;
> * set then clock accuracy will be initialized to parent accuracy
> * or 0 (perfect clock) if clock has no parent.
> *
> + * @get_phase: Queries the hardware to get the current phase of a clock.
> + * Returned values are 0-359 degrees on success, negative
> + * error codes on failure.
> + *
> * @set_phase: Shift the phase this clock signal in degrees specified
> * by the second argument. Valid values for degrees are
> * 0-359. Return 0 on success, otherwise -EERROR.
> @@ -182,6 +186,7 @@ struct clk_ops {
> unsigned long parent_rate, u8 index);
> unsigned long (*recalc_accuracy)(struct clk_hw *hw,
> unsigned long parent_accuracy);
> + int (*get_phase)(struct clk_hw *hw);
> int (*set_phase)(struct clk_hw *hw, int degrees);
> void (*init)(struct clk_hw *hw);
> int (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
