Re: [PATCH v3] mmc: tmio: enable odd number size access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ulf

ping ?

> From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> 
> Current tmio is using sd_ctrl_read16/write16_rep()
> for data transfer.
> It works if transfer size was even number,
> but, last 1 byte will be ignored if
> transfer size was odd number.
> This patch adds new tmio_mmc_transfer_data()
> and solve this issue.
> 
> Tested-by: Shinobu Uehara <shinobu.uehara.xc@xxxxxxxxxxx>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> ---
> v2 -> v3
> 
>  - remove cast
>  - remove extra variable
> 
>  drivers/mmc/host/tmio_mmc_pio.c |   39 +++++++++++++++++++++++++++++++++++----
>  1 file changed, 35 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index ff5ff0f..692e578 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -376,6 +376,40 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
>  	return 0;
>  }
>  
> +static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
> +				   unsigned short *buf,
> +				   unsigned int count)
> +{
> +	int is_read = host->data->flags & MMC_DATA_READ;
> +	u8  *buf8;
> +
> +	/*
> +	 * Transfer the data
> +	 */
> +	if (is_read)
> +		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
> +	else
> +		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
> +
> +	/* if count was even number */
> +	if (!(count & 0x1))
> +		return;
> +
> +	/* if count was odd number */
> +	buf8 = (u8 *)(buf + (count >> 1));
> +
> +	/*
> +	 * FIXME
> +	 *
> +	 * driver and this function are assuming that
> +	 * it is used as little endian
> +	 */
> +	if (is_read)
> +		*buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff;
> +	else
> +		sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8);
> +}
> +
>  /*
>   * This chip always returns (at least?) as much data as you ask for.
>   * I'm unsure what happens if you ask for less than a block. This should be
> @@ -408,10 +442,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
>  		 count, host->sg_off, data->flags);
>  
>  	/* Transfer the data */
> -	if (data->flags & MMC_DATA_READ)
> -		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
> -	else
> -		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
> +	tmio_mmc_transfer_data(host, buf, count);
>  
>  	host->sg_off += count;
>  
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux