Add the clock prepare and unprepare call to the driver set_ios calls
phase. This will remove a warning once the PXA architecture is migrated
to the clock infrastructure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
---
drivers/mmc/host/pxamci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 32fe113..96406e8 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -474,7 +474,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
unsigned int clk = rate / ios->clock;
if (host->clkrt == CLKRT_OFF)
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
if (ios->clock == 26000000) {
/* to support 26MHz */
@@ -501,7 +501,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
pxamci_stop_clock(host);
if (host->clkrt != CLKRT_OFF) {
host->clkrt = CLKRT_OFF;
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
}
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
