Re: [PATCH V3 0/6] mmc: sdhci: a few fixes on timeout and max_discard_to

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27 August 2014 09:26, Dong Aisheng <b29396@xxxxxxxxxxxxx> wrote:
> This series mainly is a rebase version due to it's somehow missed.
> See the original one at here:
> http://marc.info/?l=linux-mmc&m=138726995528304&w=2
> The issue is still exist on latest kernel.
>
> Comparing to V2, the old patch 5 is removed due to someone already pushed one
> simalar patch in the tree.
> Patch 5 and 6 in this series is newly added for a few clean up and make
> timeout_clk calculate more common for other platforms.
>
> Details patch description is as follows:
> Patch 1~4 mainly fixes the issue that the max timeout counter for uSDHC is
> 1 << 28 rather than 1 << 27. 1~2 fix getting the max timeout counter
> while 3~4 fix setting the max timeout.
> Thus it introduces two new platform hook: get_max_timeout_count and set_timeout
> for those platform which have different timeout setting.
>
> This issue is firstly reported here by Ed Sutter:
> http://www.spinics.net/lists/linux-mmc/msg23375.html
> The root cause is the max_discard_to got from uSDHC is too small, only 677ms,
> which cause the max_discard_bytes for eMMC is only 512, then the discard operation
> of mkfs.ext3 for an eMMC card is too slow, just like dead.
> With above patches, the issue can be fixed.
>
> Originally the max_discard_to for a high speed sdhc card may be:
> mmc1: new high speed SDHC card at address aaaa
> mmc1: calculated max. discard sectors 49152 for timeout 1355 ms
> After fix:
> mmc1: new high speed SDHC card at address aaaa
> mmc1: calculated max. discard sectors 712704 for timeout 5422 ms
>
> It also improves the card discard performance a lot due to max_discard_sectors
> increase a lot.
>
> ChangeLog:
> v2->v3:
>  1. rebase to Ulf's latest mmc tree
>  2. make timeout_clk calcuation common for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
>
> ChangeLog:
> v1->v2:
>  1. change .get_max_timeout to .get_max_timeout_count to reuse some code
>  2. some other minor changes based on Shawn's comment.
>  3. patch 6 in v1 is dropped since not need anymore after change 1
>
> Dong Aisheng (6):
>   mmc: sdhci: add platfrom get_max_timeout_count hook
>   mmc: sdhci-esdhc-imx: fix incorrect max timeout cout for uSDHC
>   mmc: sdhci: add platform set_timeout hook
>   mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC
>   mmc: sdhci: calculate timeout_clk conditionally in sdhci_add_host
>   mmc: sdhci: move timeout_clk dynamically calculation code into common
>     code
>
>  drivers/mmc/host/sdhci-esdhc-imx.c |   20 ++++++++++
>  drivers/mmc/host/sdhci.c           |   74 ++++++++++++++++++++++--------------
>  drivers/mmc/host/sdhci.h           |    3 +
>  3 files changed, 68 insertions(+), 29 deletions(-)
>
> --
> 1.7.8
>

Thanks! I have applied them all for next.

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux