An internal power state machine were beeing used to keep ->probe() and
->set_ios() in sync. Especially for handling specific scenarios while
using CONFIG_MMC_CLKGATE. Moreover dependency to CONFIG_MMC_CLKGATE
existed to handle runtime PM properly, which we moves away from here.
By removing the state machine and instead make ->set_ios() rely on the
information provided through the function's in-parameters, the code
becomes significantly simplier.
Additonally as a part of this rework we prepares for making the runtime
PM callbacks responsible of clock gating.
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/host/tmio_mmc.h | 20 --------------
drivers/mmc/host/tmio_mmc_pio.c | 61 ++++++++++-------------------------------
2 files changed, 14 insertions(+), 67 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index d6ceb1a..f837723 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -40,22 +40,6 @@
struct tmio_mmc_data;
-/*
- * We differentiate between the following 3 power states:
- * 1. card slot powered off, controller stopped. This is used, when either there
- * is no card in the slot, or the card really has to be powered down.
- * 2. card slot powered on, controller stopped. This is used, when a card is in
- * the slot, but no activity is currently taking place. This is a power-
- * saving mode with card-state preserved. This state can be entered, e.g.
- * when MMC clock-gating is used.
- * 3. card slot powered on, controller running. This is the actual active state.
- */
-enum tmio_mmc_power {
- TMIO_MMC_OFF_STOP, /* card power off, controller stopped */
- TMIO_MMC_ON_STOP, /* card power on, controller stopped */
- TMIO_MMC_ON_RUN, /* card power on, controller running */
-};
-
struct tmio_mmc_host {
void __iomem *ctl;
struct mmc_command *cmd;
@@ -63,9 +47,6 @@ struct tmio_mmc_host {
struct mmc_data *data;
struct mmc_host *mmc;
- /* Controller and card power state */
- enum tmio_mmc_power power;
-
/* Callbacks for clock / power control */
void (*set_pwr)(struct platform_device *host, int state);
void (*set_clk_div)(struct platform_device *host, int state);
@@ -100,7 +81,6 @@ struct tmio_mmc_host {
unsigned long last_req_ts;
struct mutex ios_lock; /* protect set_ios() context */
bool native_hotplug;
- bool resuming;
bool sdio_irq_enabled;
};
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 8f5b5cc..e573a15 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -884,51 +884,23 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_unlock_irqrestore(&host->lock, flags);
- /*
- * host->power toggles between false and true in both cases - either
- * or not the controller can be runtime-suspended during inactivity.
- * But if the controller has to be kept on, the runtime-pm usage_count
- * is kept positive, so no suspending actually takes place.
- */
- if (ios->power_mode == MMC_POWER_ON && ios->clock) {
- if (host->power != TMIO_MMC_ON_RUN) {
- tmio_mmc_clk_update(mmc);
- if (host->resuming) {
- tmio_mmc_reset(host);
- host->resuming = false;
- }
- }
- if (host->power == TMIO_MMC_OFF_STOP)
- tmio_mmc_reset(host);
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ tmio_mmc_power_off(host);
+ tmio_mmc_clk_stop(host);
+ break;
+ case MMC_POWER_UP:
tmio_mmc_set_clock(host, ios->clock);
- if (host->power == TMIO_MMC_OFF_STOP)
- /* power up SD card and the bus */
- tmio_mmc_power_on(host, ios->vdd);
- host->power = TMIO_MMC_ON_RUN;
- /* start bus clock */
+ tmio_mmc_power_on(host, ios->vdd);
tmio_mmc_clk_start(host);
- } else if (ios->power_mode != MMC_POWER_UP) {
- struct tmio_mmc_data *pdata = host->pdata;
- unsigned int old_power = host->power;
-
- if (old_power != TMIO_MMC_OFF_STOP) {
- if (ios->power_mode == MMC_POWER_OFF) {
- tmio_mmc_power_off(host);
- host->power = TMIO_MMC_OFF_STOP;
- } else {
- host->power = TMIO_MMC_ON_STOP;
- }
- }
-
- if (old_power == TMIO_MMC_ON_RUN) {
- tmio_mmc_clk_stop(host);
- if (pdata->clk_disable)
- pdata->clk_disable(host->pdev);
- }
- }
-
- if (host->power != TMIO_MMC_OFF_STOP)
tmio_mmc_set_bus_width(host, ios->bus_width);
+ break;
+ case MMC_POWER_ON:
+ tmio_mmc_set_clock(host, ios->clock);
+ tmio_mmc_clk_start(host);
+ tmio_mmc_set_bus_width(host, ios->bus_width);
+ break;
+ }
/* Let things settle. delay taken from winCE driver */
udelay(140);
@@ -1064,7 +1036,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
mmc->caps & MMC_CAP_NONREMOVABLE ||
mmc->slot.cd_irq >= 0);
- _host->power = TMIO_MMC_OFF_STOP;
if (tmio_mmc_clk_update(mmc) < 0) {
mmc->f_max = pdata->hclk;
mmc->f_min = mmc->f_max / 512;
@@ -1116,8 +1087,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
pm_runtime_enable(&pdev->dev);
ret = mmc_add_host(mmc);
- if (pdata->clk_disable)
- pdata->clk_disable(pdev);
if (ret < 0) {
tmio_mmc_host_remove(_host);
return ret;
@@ -1185,8 +1154,6 @@ int tmio_mmc_host_resume(struct device *dev)
tmio_mmc_enable_dma(host, true);
- /* The MMC core will perform the complete set up */
- host->resuming = true;
return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_resume);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
