This patchset fixes few sdio related issues encountered while testing WLAN ath6kl via SDIO on IFC6410 board with Qualcomm APQ8064 SOC. Patch: "mmc: mmci: Support any block sizes for ux500v2 and qcom variant" is a very old patch by Ulf to support IPs which support any size of block sizes. http://www.spinics.net/lists/linux-mmc/msg12160.html I modified the subject line to include qcom. Patch fixes below issues reported while testing sdio. The issue was ath6kl driver was issuing 12 bytes and 24 bytes reads which are caught as part of the error handing in the driver and resulting in failures. Patch "mmc: mmci: Add sdio enable mask in variant data" adds extra variant parameter to enable sdio. This makes mmci driver more flexible. Patch "mmc: mmci: rename sdio flag in vendor data to st_sdio" renames sdio flag in vendor data to st_sdio, as this flag is only used to setup st specific sdio logic. All these patches are tested on IFC6410 board with ath6kl WLAN via SDIO. Thanks to Linus W, Ulf annd Russell for comments since RFC. Changes since v2: - removed "mmc: mmci: move block size validation under relevant code" patch as this is already fixed by original patch from Ulf. Changes since RFC: - moved sdio flag to st_sdio to simplify the checks. - use Ulf's patch to address IP's which support anysize blocks. Thanks, srini Srinivas Kandagatla (2): mmc: mmci: Add sdio enable mask in variant data mmc: mmci: rename sdio flag in vendor data to st_sdio Ulf Hansson (1): mmc: mmci: Support any block sizes for ux500v2 and qcom variant drivers/mmc/host/mmci.c | 68 ++++++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 32 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
