Hi,
I'm currently updating the kernel of a PXA3xx platform that used to be
bases on 3.0. On that, a libertas is connected to the PXA mci controller
via SDIO.
The card itself works fine on both the old version and 3.16, but on
3.16, I see the following error when trying to put the system to suspend:
[ 13.459502] mmc0: new SDIO card at address 0001
[ 15.103333] libertas_sdio: Libertas SDIO driver
[ 15.107864] libertas_sdio: Copyright Pierre Ossman
[ 15.660291] libertas_sdio mmc0:0001:1 (unregistered net_device):
00:19:88:21:f6:22, fw 9.70.20p0, cap 0x00000303
[ 15.675960] libertas_sdio mmc0:0001:1 wlan0: Marvell WLAN 802.11 adapter
[ 15.684075] cfg80211: Calling CRDA to update world regulatory domain
# echo mem >/sys/power/state
[ 18.617456] PM: Syncing filesystems ... done.
[ 18.634231] Freezing user space processes ... (elapsed 0.000 seconds)
done.
[ 18.641312] Freezing remaining freezable tasks ... (elapsed 0.007
seconds) done.
[ 18.658322] dpm_run_callback(): pm_generic_suspend+0x0/0x38 returns -38
[ 18.665136] PM: Device mmc0:0001:1 failed to suspend: error -38
[ 18.671035] PM: Some devices failed to suspend, or early wake event
detected
The problem is caused by libertas' if_sdio_suspend() returning -ENOSYS here:
/* If we're powered off anyway, just let the mmc layer remove the
* card. */
if (!lbs_iface_active(card->priv))
return -ENOSYS;
According to the comment, the code assumes the function is called from
the mmc layer, which isn't the case - the stack trace leading to this
function looks like this:
[ 15.767603] [<bf019048>] (if_sdio_suspend [libertas_sdio]) from
[<c0285980>] (pm_generic_suspend+0x2c/0x38)
[ 15.779843] [<c0285980>] (pm_generic_suspend) from [<c0286c1c>]
(dpm_run_callback.isra.21+0x18/0x44)
[ 15.790863] [<c0286c1c>] (dpm_run_callback.isra.21) from [<c0287cdc>]
(__device_suspend+0x148/0x220)
[ 15.800039] [<c0287cdc>] (__device_suspend) from [<c0288478>]
(dpm_suspend+0xa8/0x204)
[ 15.808464] [<c0288478>] (dpm_suspend) from [<c00410c8>]
(suspend_devices_and_enter+0x3c/0x300)
[ 15.817858] [<c00410c8>] (suspend_devices_and_enter) from
[<c0041458>] (pm_suspend+0xcc/0x1b0)
[ 15.827037] [<c0041458>] (pm_suspend) from [<c0040360>]
(state_store+0xb8/0xdc)
[ 15.834678] [<c0040360>] (state_store) from [<c022891c>]
(kobj_attr_store+0x14/0x20)
[ 15.842664] [<c022891c>] (kobj_attr_store) from [<c00ebcc0>]
(sysfs_kf_write+0x3c/0x48)
[ 15.851209] [<c00ebcc0>] (sysfs_kf_write) from [<c00eaed8>]
(kernfs_fop_write+0x100/0x158)
[ 15.860039] [<c00eaed8>] (kernfs_fop_write) from [<c009766c>]
(vfs_write+0xb4/0x188)
[ 15.868335] [<c009766c>] (vfs_write) from [<c0097bec>]
(SyS_write+0x3c/0x7c)
[ 15.875949] [<c0097bec>] (SyS_write) from [<c00092e0>]
(ret_fast_syscall+0x0/0x2c)
Bisecting is tricky due to other details unfortunately.
Any ideas?
Thanks,
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
