On 14 August 2014 12:05, Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx> wrote:
> Right now enable 1.2v IO voltage for SDHC is by using vqmmc.
> Thus for the host which doesn't have vqmmc, or its vqmmc does
> not support 1.2v, directly use MMC_CAP2_HS200 may cause HS200
> failure.
>
> So needs to check if vqmmc is able to support 1.2v. If it does
> not support, disable 1.2v IO for HS200.
>
> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index c026ec8..6b701e1 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2999,8 +2999,12 @@ int sdhci_add_host(struct sdhci_host *host)
> /* SD3.0: SDR104 is supported so (for eMMC) the caps2
> * field can be promoted to support HS200.
> */
> - if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
> + if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
> mmc->caps2 |= MMC_CAP2_HS200;
> + if (!host->vqmmc || !regulator_is_supported_voltage
This needs a rebase and please use IS_ERR.
(!IS_ERR(mmc->supply.vqmmc) ...
Kind regards
Uffe
> + (host->vqmmc, 1100000, 1300000))
> + mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
> + }
> } else if (caps[1] & SDHCI_SUPPORT_SDR50)
> mmc->caps |= MMC_CAP_UHS_SDR50;
>
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
