> It's convenient (and less confusing to people reading logs) if the > eMMC port on rk3288 is consistenly marked with mmc0 and the sdmmc port > on rk3288 is consistently marked with mmc1. Add the appropriate > aliases. > > These aliases only actually do something if a patch like > (https://patchwork.kernel.org/patch/3925551/) lands, but they don't > hurt even before that patch. > > Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> > Reviewed-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx> > --- > arch/arm/boot/dts/rk3288.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi > index 36be7bb..0b54b0d 100644 > --- a/arch/arm/boot/dts/rk3288.dtsi > +++ b/arch/arm/boot/dts/rk3288.dtsi > @@ -29,6 +29,8 @@ > i2c3 = &i2c3; > i2c4 = &i2c4; > i2c5 = &i2c5; > + mmc0 = &emmc; > + mmc1 = &sdmmc; There are 8 registers can be configured for clock tunning(see chapter 3, page 133): sdmmc: CRU_SDMMC_CON0(offset: 0x200) CRU_SDMMC_CON1(offset: 0x204) sdio0: CRU_SDMMC_CON2(offset: 0x208) CRU_SDMMC_CON3(offset: 0x20c) sdio1: CRU_SDMMC_CON4(offset: 0x210) CRU_SDMMC_CON5(offset: 0x214) emmc: CRU_SDMMC_CON6(offset: 0x218) CRU_SDMMC_CON7(offset: 0x21c) I think maybe it is suitable as follows: mmc0 = &sdmmc mmc1 = &sdio0 mmc2 = &sdio1 mmc3 = &emmc So we can get ctrl_id: ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); and can get offset of registers: offset = 0x200 + ctrl_id * 8 + 4 * drive_or_sample > serial0 = &uart0; > serial1 = &uart1; > serial2 = &uart2; -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
