On Tue, Aug 5, 2014 at 12:20 PM, Jean-Michel Hautbois
<jean-michel.hautbois@xxxxxxxxxxx> wrote:
> Thanks. Here are my settings (I used the imx6qdl-sabresd as an example) :
>
> pinctrl_usdhc4: usdhc4grp {
> fsl,pins = <
> MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
> MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
> MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
> MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
> MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
> MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
> MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
> MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
> MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
> MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
> >;
> };
>
> &usdhc4 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc4>;
> bus-width = <8>;
> non-removable;
> no-1-8-v;
> status = "okay";
> };
Which kernel version are using? Does your board use the exact same
pins as mx6qsabresd for the eMMC?
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
