On Wed, Jul 16, 2014 at 12:45 AM, Laurent Pinchart
<laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> wrote:
> Add references to the transmit and receive DMA channels in the four
> SDHI nodes.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
but see below for a question (this also applies to other members of the R-Car
Gen 2 family)...
> ---
> arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index 465008a..2ea3b2a 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -406,6 +410,8 @@
> reg = <0 0xee140000 0 0x100>;
> interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
> + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
> + dma-names = "tx", "rx";
> cap-sd-highspeed;
> status = "disabled";
> };
> @@ -415,6 +421,8 @@
> reg = <0 0xee160000 0 0x100>;
> interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
> + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
> + dma-names = "tx", "rx";
> cap-sd-highspeed;
> status = "disabled";
> };
SDHI2 and SDHI3 actually have 2 sets of 2 (TX and RX) DMA channels:
the normal one, and the "C2" one. However, I didn't get any wiser about this
"C2" by browsing through the docs.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
