This adds support for the sdmmc and emmc ports on the rk3288 using the currently posted driver from Addy at: https://patchwork.kernel.org/patch/4653631/ This enables basic SD and eMMC support. Things are not yet running at the fastest speed and we don't have the regulators specified, but we can at least use the eMMC and SD cards now. A few notes: * This is not baesd on Jaehoon's patch series removing the slot node, but it does use new syntax like putting the bus width at the top level and using the new cap-mmc-highspeed / cap-sd-highspeed. A future patch will modify this one to remove the slot node. Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> --- Changes in v2: - Squashed in the DDR50 mode since Addy spun his patch. - New patchwork link for Addy's patch arch/arm/boot/dts/rk3288-evb.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 749e20d..ec580fa 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -37,6 +37,39 @@ }; }; +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; + + slot@0 { + reg = <0>; + disable-wp; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + + slot@0 { + reg = <0>; + disable-wp; /* wp not hooked up */ + }; +}; + &i2c0 { status = "okay"; }; -- 2.0.0.526.g5318336 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
