Re: [PATCHv8 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jaehoon,

On Wed, Jul 30, 2014 at 4:05 AM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index d0de1f5..42a3590 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -401,7 +401,6 @@
>         mmc_0: mmc@12200000 {
>                 status = "okay";
>                 num-slots = <1>;
> -               supports-highspeed;
>                 broken-cd;
>                 card-detect-delay = <200>;
>                 samsung,dw-mshc-ciu-div = <3>;
> @@ -410,17 +409,13 @@
>                 vmmc-supply = <&mmc_reg>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> -
> -               slot@0 {
> -                       reg = <0>;
> -                       bus-width = <8>;
> -               };
> +               bus-width = <8>;
> +               cap-mmc-highspeed;
>         };
>
>         mmc_2: mmc@12220000 {
>                 status = "okay";
>                 num-slots = <1>;
> -               supports-highspeed;
>                 card-detect-delay = <200>;
>                 samsung,dw-mshc-ciu-div = <3>;
>                 samsung,dw-mshc-sdr-timing = <2 3>;
> @@ -428,12 +423,9 @@
>                 vmmc-supply = <&mmc_reg>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> -
> -               slot@0 {
> -                       reg = <0>;
> -                       bus-width = <4>;
> -                       disable-wp;
> -               };
> +               bus-width = <4>;
> +               disable-wp;
> +               cap-sd-highspeed;

It seems like you ought to include cap-mmc-highspeed in addition to
cap-sd-highspeed, but I could be wrong.  I know that I have some
full-sized MMC cards (not eMMC) that can be plugged into an SD card
slot.  I know that the SD/MMC slot on this port only has 4 pins on
exynos5250, but I think you can still run MMC highspeed on 4 pins,
right?

-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux