Re: [PATCH v3] mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5 May 2014 12:50, peter.guo <peter.guo@xxxxxxxxxxxxxx> wrote:
> From: Peter Guo <peter.guo@xxxxxxxxxxxxxx>
>
> Add O2Micro/BayHubTech chip 8520 subversion B1 SD3.0 support.
> Add O2Micro/BayHubTech chip 8620 and 8621 SD3.0 support
> Enable Led function of 8520 chip.
>
> Signed-off-by: Peter Guo <peter.guo@xxxxxxxxxxxxxx>
> Signed-off-by: Adam Lee <adam.lee@xxxxxxxxxxxxx>

Thanks Peter, Adam!

Unless someone objects, I intend to include this in the next PR I send to Chris.

Kind regards
Ulf Hansson

> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 78 +++++++++++++++++++++++++++++++++++-
>  drivers/mmc/host/sdhci-pci-o2micro.h |  3 ++
>  2 files changed, 80 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index f49666b..eafcd92 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -21,6 +21,45 @@
>  #include "sdhci-pci.h"
>  #include "sdhci-pci-o2micro.h"
>
> +static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
> +{
> +       u32 scratch_32;
> +       pci_read_config_dword(chip->pdev,
> +                             O2_SD_PLL_SETTING, &scratch_32);
> +
> +       scratch_32 &= 0x0000FFFF;
> +       scratch_32 |= value;
> +
> +       pci_write_config_dword(chip->pdev,
> +                              O2_SD_PLL_SETTING, scratch_32);
> +}
> +
> +static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
> +{
> +       int ret;
> +       u32 scratch_32;
> +
> +       /* Set led of SD host function enable */
> +       ret = pci_read_config_dword(chip->pdev,
> +                                   O2_SD_FUNC_REG0, &scratch_32);
> +       if (ret)
> +               return;
> +
> +       scratch_32 &= ~O2_SD_FREG0_LEDOFF;
> +       pci_write_config_dword(chip->pdev,
> +                              O2_SD_FUNC_REG0, scratch_32);
> +
> +       ret = pci_read_config_dword(chip->pdev,
> +                                   O2_SD_TEST_REG, &scratch_32);
> +       if (ret)
> +               return;
> +
> +       scratch_32 |= O2_SD_LED_ENABLE;
> +       pci_write_config_dword(chip->pdev,
> +                              O2_SD_TEST_REG, scratch_32);
> +
> +}
> +
>  void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
>  {
>         u32 scratch_32;
> @@ -216,6 +255,40 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
>                 scratch &= 0x7f;
>                 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
>
> +               /* DevId=8520 subId= 0x11 or 0x12  Type Chip support */
> +               if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
> +                       ret = pci_read_config_dword(chip->pdev,
> +                                                   O2_SD_FUNC_REG0,
> +                                                   &scratch_32);
> +                       scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
> +
> +                       /* Check Whether subId is 0x11 or 0x12 */
> +                       if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
> +                               scratch_32 = 0x2c280000;
> +
> +                               /* Set Base Clock to 208MZ */
> +                               o2_pci_set_baseclk(chip, scratch_32);
> +                               ret = pci_read_config_dword(chip->pdev,
> +                                                           O2_SD_FUNC_REG4,
> +                                                           &scratch_32);
> +
> +                               /* Enable Base Clk setting change */
> +                               scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
> +                               pci_write_config_dword(chip->pdev,
> +                                                      O2_SD_FUNC_REG4,
> +                                                      scratch_32);
> +
> +                               /* Set Tuning Window to 4 */
> +                               pci_write_config_byte(chip->pdev,
> +                                                     O2_SD_TUNING_CTRL, 0x44);
> +
> +                               break;
> +                       }
> +               }
> +
> +               /* Enable 8520 led function */
> +               o2_pci_led_enable(chip);
> +
>                 /* Set timeout CLK */
>                 ret = pci_read_config_dword(chip->pdev,
>                                             O2_SD_CLK_SETTING, &scratch_32);
> @@ -276,7 +349,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
>                 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
>
>                 ret = pci_read_config_dword(chip->pdev,
> -                                           O2_SD_FUNC_REG0, &scratch_32);
> +                                           O2_SD_PLL_SETTING, &scratch_32);
>
>                 if ((scratch_32 & 0xff000000) == 0x01000000) {
>                         scratch_32 &= 0x0000FFFF;
> @@ -299,6 +372,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
>                                                O2_SD_FUNC_REG4, scratch_32);
>                 }
>
> +               /* Set Tuning Windows to 5 */
> +               pci_write_config_byte(chip->pdev,
> +                               O2_SD_TUNING_CTRL, 0x55);
>                 /* Lock WP */
>                 ret = pci_read_config_byte(chip->pdev,
>                                            O2_SD_LOCK_WP, &scratch);
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.h b/drivers/mmc/host/sdhci-pci-o2micro.h
> index dbec4c9..a87ae24 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.h
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.h
> @@ -57,6 +57,9 @@
>  #define O2_SD_UHS2_L1_CTRL     0x35C
>  #define O2_SD_FUNC_REG3                0x3E0
>  #define O2_SD_FUNC_REG4                0x3E4
> +#define O2_SD_LED_ENABLE       BIT(6)
> +#define O2_SD_FREG0_LEDOFF     BIT(13)
> +#define O2_SD_FREG4_ENABLE_CLK_SET     BIT(22)
>
>  #define O2_SD_VENDOR_SETTING   0x110
>  #define O2_SD_VENDOR_SETTING2  0x1C8
> --
> 2.0.0.rc0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux