Move the regulator handling into sdhci_set_power() rather than being in sdhci_do_set_ios(). This wraps all power control up into this function. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci.c | 72 +++++++++++++++++++++++------------------------- 1 file changed, 35 insertions(+), 37 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 02d43765ddd5..95604e09a00d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1216,7 +1216,7 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) } EXPORT_SYMBOL_GPL(sdhci_set_clock); -static int sdhci_set_power(struct sdhci_host *host, unsigned short power) +static void sdhci_set_power(struct sdhci_host *host, unsigned short power) { u8 pwr = 0; @@ -1239,7 +1239,7 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power) } if (host->pwr == pwr) - return -1; + return; host->pwr = pwr; @@ -1247,38 +1247,43 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power) sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) sdhci_runtime_pm_bus_off(host); - return 0; - } - - /* - * Spec says that we should clear the power reg before setting - * a new value. Some controllers don't seem to like this though. - */ - if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) - sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + power = 0; + } else { + /* + * Spec says that we should clear the power reg before setting + * a new value. Some controllers don't seem to like this though. + */ + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - /* - * At least the Marvell CaFe chip gets confused if we set the voltage - * and set turn on power at the same time, so set the voltage first. - */ - if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + /* + * At least the Marvell CaFe chip gets confused if we set the + * voltage and set turn on power at the same time, so set the + * voltage first. + */ + if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - pwr |= SDHCI_POWER_ON; + pwr |= SDHCI_POWER_ON; - sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); - if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) - sdhci_runtime_pm_bus_on(host); + if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON) + sdhci_runtime_pm_bus_on(host); - /* - * Some controllers need an extra 10ms delay of 10ms before they - * can apply clock after applying power - */ - if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) - mdelay(10); + /* + * Some controllers need an extra 10ms delay of 10ms before + * they can apply clock after applying power + */ + if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) + mdelay(10); + } - return power; + if (host->vmmc) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(host->mmc, host->vmmc, power); + spin_lock_irq(&host->lock); + } } /*****************************************************************************\ @@ -1428,7 +1433,6 @@ EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling); static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) { unsigned long flags; - int vdd_bit = -1; u8 ctrl; spin_lock_irqsave(&host->lock, flags); @@ -1460,15 +1464,9 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) } if (ios->power_mode == MMC_POWER_OFF) - vdd_bit = sdhci_set_power(host, -1); + sdhci_set_power(host, -1); else - vdd_bit = sdhci_set_power(host, ios->vdd); - - if (host->vmmc && vdd_bit != -1) { - spin_unlock_irqrestore(&host->lock, flags); - mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit); - spin_lock_irqsave(&host->lock, flags); - } + sdhci_set_power(host, ios->vdd); if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html