Switch the common SDHCI code over to use mmc_host's regulator pointers and remove the ones in the sdhci_host structure. Additionally, use the common mmc_regulator_get_supply function to get the regulators and set the ocr_avail mask. This change sets the ocr_avail directly based upon the voltage ranges supported which ensures ocr_avail is set correctly while allowing the use of regulators that can't provide exactly 1.8v, 3.0v, or 3.3v. Signed-off-by: Tim Kryger <tim.kryger@xxxxxxxxxx> --- This patch is the same as the following series only squashed together. https://lkml.org/lkml/2014/4/17/653 drivers/mmc/host/sdhci.c | 96 +++++++++++++++++---------------------------- include/linux/mmc/sdhci.h | 3 -- 2 files changed, 35 insertions(+), 64 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9a79fc4..2d081d8 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1429,6 +1429,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) { + struct mmc_host *mmc = host->mmc; unsigned long flags; int vdd_bit = -1; u8 ctrl; @@ -1437,8 +1438,9 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) if (host->flags & SDHCI_DEVICE_DEAD) { spin_unlock_irqrestore(&host->lock, flags); - if (host->vmmc && ios->power_mode == MMC_POWER_OFF) - mmc_regulator_set_ocr(host->mmc, host->vmmc, 0); + if (!IS_ERR(mmc->supply.vmmc) && + ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0); return; } @@ -1463,9 +1465,9 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) else vdd_bit = sdhci_set_power(host, ios->vdd); - if (host->vmmc && vdd_bit != -1) { + if (!IS_ERR(mmc->supply.vmmc) && vdd_bit != -1) { spin_unlock_irqrestore(&host->lock, flags); - mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit); + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd_bit); spin_lock_irqsave(&host->lock, flags); } @@ -1742,6 +1744,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, struct mmc_ios *ios) { + struct mmc_host *mmc = host->mmc; u16 ctrl; int ret; @@ -1760,8 +1763,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl &= ~SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000); + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, + 3600000); if (ret) { pr_warning("%s: Switching to 3.3V signalling voltage " " failed\n", mmc_hostname(host->mmc)); @@ -1781,8 +1785,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, return -EAGAIN; case MMC_SIGNAL_VOLTAGE_180: - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 1700000, 1950000); if (ret) { pr_warning("%s: Switching to 1.8V signalling voltage " @@ -1811,8 +1815,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, return -EAGAIN; case MMC_SIGNAL_VOLTAGE_120: - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000); + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, + 1300000); if (ret) { pr_warning("%s: Switching to 1.2V signalling voltage " " failed\n", mmc_hostname(host->mmc)); @@ -2975,25 +2980,22 @@ int sdhci_add_host(struct sdhci_host *host) !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; + /* If there are external regulators, get them */ + if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ - host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc"); - if (IS_ERR_OR_NULL(host->vqmmc)) { - if (PTR_ERR(host->vqmmc) < 0) { - pr_info("%s: no vqmmc regulator found\n", - mmc_hostname(mmc)); - host->vqmmc = NULL; - } - } else { - ret = regulator_enable(host->vqmmc); - if (!regulator_is_supported_voltage(host->vqmmc, 1700000, - 1950000)) + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_enable(mmc->supply.vqmmc); + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, + 1950000)) caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); if (ret) { pr_warn("%s: Failed to enable vqmmc regulator: %d\n", mmc_hostname(mmc), ret); - host->vqmmc = NULL; + mmc->supply.vqmmc = NULL; } } @@ -3054,34 +3056,6 @@ int sdhci_add_host(struct sdhci_host *host) ocr_avail = 0; - host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc"); - if (IS_ERR_OR_NULL(host->vmmc)) { - if (PTR_ERR(host->vmmc) < 0) { - pr_info("%s: no vmmc regulator found\n", - mmc_hostname(mmc)); - host->vmmc = NULL; - } - } - -#ifdef CONFIG_REGULATOR - /* - * Voltage range check makes sense only if regulator reports - * any voltage value. - */ - if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) { - ret = regulator_is_supported_voltage(host->vmmc, 2700000, - 3600000); - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) - caps[0] &= ~SDHCI_CAN_VDD_330; - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) - caps[0] &= ~SDHCI_CAN_VDD_300; - ret = regulator_is_supported_voltage(host->vmmc, 1700000, - 1950000); - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) - caps[0] &= ~SDHCI_CAN_VDD_180; - } -#endif /* CONFIG_REGULATOR */ - /* * According to SD Host Controller spec v3.00, if the Host System * can afford more than 150mA, Host Driver should set XPC to 1. Also @@ -3090,8 +3064,8 @@ int sdhci_add_host(struct sdhci_host *host) * value. */ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); - if (!max_current_caps && host->vmmc) { - u32 curr = regulator_get_current_limit(host->vmmc); + if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) { + u32 curr = regulator_get_current_limit(mmc->supply.vmmc); if (curr > 0) { /* convert to SDHCI_MAX_CURRENT format */ @@ -3131,8 +3105,11 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_MAX_CURRENT_MULTIPLIER; } + if (mmc->ocr_avail) + ocr_avail &= mmc->ocr_avail; + if (host->ocr_mask) - ocr_avail = host->ocr_mask; + ocr_avail &= host->ocr_mask; mmc->ocr_avail = ocr_avail; mmc->ocr_avail_sdio = ocr_avail; @@ -3288,6 +3265,7 @@ EXPORT_SYMBOL_GPL(sdhci_add_host); void sdhci_remove_host(struct sdhci_host *host, int dead) { + struct mmc_host *mmc = host->mmc; unsigned long flags; if (dead) { @@ -3325,15 +3303,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - if (host->vmmc) { - regulator_disable(host->vmmc); - regulator_put(host->vmmc); - } + if (!IS_ERR(mmc->supply.vmmc)) + regulator_disable(mmc->supply.vmmc); - if (host->vqmmc) { - regulator_disable(host->vqmmc); - regulator_put(host->vqmmc); - } + if (!IS_ERR(mmc->supply.vqmmc)) + regulator_disable(mmc->supply.vqmmc); kfree(host->adma_desc); kfree(host->align_buffer); diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 7be12b8..0e3c3f8 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -108,9 +108,6 @@ struct sdhci_host { const struct sdhci_ops *ops; /* Low level hw interface */ - struct regulator *vmmc; /* Power regulator (vmmc) */ - struct regulator *vqmmc; /* Signaling regulator (vccq) */ - /* Internal data */ struct mmc_host *mmc; /* MMC structure */ u64 dma_mask; /* custom DMA mask */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
