This series adds the support for the SDHCI controller for Marvell Berlin SoCs and enable the SD card reader and eMMC for the BG2Q DMP. The controller supports 3 sockets. Tested on the BG2Q DMP. This series applies on top of Alexandre's patches for the Berlin's pll: https://patchwork.kernel.org/patch/3890341/ https://patchwork.kernel.org/patch/3876271/ Antoine Ténart (4): mmc: sdhci: add a driver for Berlin SoCs Documentation: bindings: add the sdhci-berlin ARM: dts: berlin: add the SDHCI nodes for the BG2Q ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP .../devicetree/bindings/mmc/sdhci-berlin.txt | 18 +++ arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 ++ arch/arm/boot/dts/berlin2q.dtsi | 40 +++++++ drivers/mmc/host/Kconfig | 11 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-berlin.c | 129 +++++++++++++++++++++ 6 files changed, 207 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-berlin.txt create mode 100644 drivers/mmc/host/sdhci-berlin.c -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
