Tegra SDHCI controllers, by default, report a base clock frequency
of 208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the
actual base clock frequency. While this can be overridden by setting
BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on Tegra30 and later SoCs, just
set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN and supply a get_max_clock()
callback to get the actual rate of the base clock.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-tegra.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 3cadd9c..c3f92d9 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -165,13 +165,15 @@ static const struct sdhci_ops tegra_sdhci_ops = {
.write_l = tegra_sdhci_writel,
.platform_bus_width = tegra_sdhci_buswidth,
.platform_reset_exit = tegra_sdhci_reset_exit,
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
- SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &tegra_sdhci_ops,
};
@@ -186,7 +188,8 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
- SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &tegra_sdhci_ops,
};
@@ -202,7 +205,8 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
- SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &tegra_sdhci_ops,
};
--
1.9.1.423.g4596e3a
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
