Re: [PATCH v5 2/5] mmc: identify available device type to select

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11 April 2014 13:34, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> Device types which are supported by both host and device
> can be identified when EXT_CSD is read. There is no need to
> check host's capability anymore.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> Tested-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>

Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

> ---
>  drivers/mmc/core/mmc.c   |   72 +++++++++++++++++++++++++---------------------
>  include/linux/mmc/card.h |    2 +-
>  include/linux/mmc/host.h |    6 ----
>  include/linux/mmc/mmc.h  |   12 +++++--
>  4 files changed, 48 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index db9655f..97f1912 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -243,28 +243,46 @@ static void mmc_select_card_type(struct mmc_card *card)
>         u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
>         u32 caps = host->caps, caps2 = host->caps2;
>         unsigned int hs_max_dtr = 0;
> +       unsigned int avail_type = 0;
>
> -       if (card_type & EXT_CSD_CARD_TYPE_26)
> +       if (caps & MMC_CAP_MMC_HIGHSPEED &&
> +           card_type & EXT_CSD_CARD_TYPE_HS_26) {
>                 hs_max_dtr = MMC_HIGH_26_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_HS_26;
> +       }
>
>         if (caps & MMC_CAP_MMC_HIGHSPEED &&
> -                       card_type & EXT_CSD_CARD_TYPE_52)
> +           card_type & EXT_CSD_CARD_TYPE_HS_52) {
>                 hs_max_dtr = MMC_HIGH_52_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_HS_52;
> +       }
>
> -       if ((caps & MMC_CAP_1_8V_DDR &&
> -                       card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
> -           (caps & MMC_CAP_1_2V_DDR &&
> -                       card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
> +       if (caps & MMC_CAP_1_8V_DDR &&
> +           card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
>                 hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
> +       }
> +
> +       if (caps & MMC_CAP_1_2V_DDR &&
> +           card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
> +               hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V;
> +       }
>
> -       if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
> -                       card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
> -           (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
> -                       card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
> +       if (caps2 & MMC_CAP2_HS200_1_8V_SDR &&
> +           card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) {
>                 hs_max_dtr = MMC_HS200_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V;
> +       }
> +
> +       if (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
> +           card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) {
> +               hs_max_dtr = MMC_HS200_MAX_DTR;
> +               avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V;
> +       }
>
>         card->ext_csd.hs_max_dtr = hs_max_dtr;
> -       card->ext_csd.card_type = card_type;
> +       card->mmc_avail_type = avail_type;
>  }
>
>  /*
> @@ -808,12 +826,10 @@ static int mmc_select_hs200(struct mmc_card *card)
>
>         host = card->host;
>
> -       if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
> -                       host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
> +       if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
>                 err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
>
> -       if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
> -                       host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
> +       if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
>                 err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
>
>         /* If fails try again during next card power cycle */
> @@ -1072,10 +1088,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>          */
>         if (card->ext_csd.hs_max_dtr != 0) {
>                 err = 0;
> -               if (card->ext_csd.hs_max_dtr > 52000000 &&
> -                   host->caps2 & MMC_CAP2_HS200)
> +               if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
>                         err = mmc_select_hs200(card);
> -               else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> +               else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS)
>                         err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>                                         EXT_CSD_HS_TIMING, 1,
>                                         card->ext_csd.generic_cmd6_time,
> @@ -1089,13 +1104,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                                mmc_hostname(card->host));
>                         err = 0;
>                 } else {
> -                       if (card->ext_csd.hs_max_dtr > 52000000 &&
> -                           host->caps2 & MMC_CAP2_HS200) {
> +                       if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
>                                 mmc_set_timing(card->host,
>                                                MMC_TIMING_MMC_HS200);
> -                       } else {
> +                       else
>                                 mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> -                       }
>                 }
>         }
>
> @@ -1118,14 +1131,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>         /*
>          * Indicate DDR mode (if supported).
>          */
> -       if (mmc_card_hs(card)) {
> -               if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
> -                       && (host->caps & MMC_CAP_1_8V_DDR))
> -                               ddr = MMC_1_8V_DDR_MODE;
> -               else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
> -                       && (host->caps & MMC_CAP_1_2V_DDR))
> -                               ddr = MMC_1_2V_DDR_MODE;
> -       }
> +       if (mmc_card_hs(card))
> +               ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52;
>
>         /*
>          * Indicate HS200 SDR mode (if supported).
> @@ -1145,8 +1152,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                  * 3. set the clock to > 52Mhz <=200MHz and
>                  * 4. execute tuning for HS200
>                  */
> -               if ((host->caps2 & MMC_CAP2_HS200) &&
> -                   card->host->ops->execute_tuning) {
> +               if (card->host->ops->execute_tuning) {
>                         mmc_host_clk_hold(card->host);
>                         err = card->host->ops->execute_tuning(card->host,
>                                 MMC_SEND_TUNING_BLOCK_HS200);
> @@ -1255,7 +1261,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                          *
>                          * WARNING: eMMC rules are NOT the same as SD DDR
>                          */
> -                       if (ddr == MMC_1_2V_DDR_MODE) {
> +                       if (ddr & EXT_CSD_CARD_TYPE_DDR_1_2V) {
>                                 err = __mmc_set_signal_voltage(host,
>                                         MMC_SIGNAL_VOLTAGE_120);
>                                 if (err)
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 5473133..b9f194a 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -68,7 +68,6 @@ struct mmc_ext_csd {
>  #define MMC_HIGH_DDR_MAX_DTR   52000000
>  #define MMC_HS200_MAX_DTR      200000000
>         unsigned int            sectors;
> -       unsigned int            card_type;
>         unsigned int            hc_erase_size;          /* In sectors */
>         unsigned int            hc_erase_timeout;       /* In milliseconds */
>         unsigned int            sec_trim_mult;  /* Secure trim multiplier  */
> @@ -298,6 +297,7 @@ struct mmc_card {
>         struct sdio_func_tuple  *tuples;        /* unknown common tuples */
>
>         unsigned int            sd_bus_speed;   /* Bus Speed Mode set for the card */
> +       unsigned int            mmc_avail_type; /* supported device type by both host and card */
>
>         struct dentry           *debugfs_root;
>         struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 2f263ae..1ee3c10 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -62,12 +62,6 @@ struct mmc_ios {
>  #define MMC_TIMING_MMC_DDR52   8
>  #define MMC_TIMING_MMC_HS200   9
>
> -#define MMC_SDR_MODE           0
> -#define MMC_1_2V_DDR_MODE      1
> -#define MMC_1_8V_DDR_MODE      2
> -#define MMC_1_2V_SDR_MODE      3
> -#define MMC_1_8V_SDR_MODE      4
> -
>         unsigned char   signal_voltage;         /* signalling voltage (1.8V or 3.3V) */
>
>  #define MMC_SIGNAL_VOLTAGE_330 0
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 50bcde3..f734c0c 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -354,18 +354,22 @@ struct _mmc_csd {
>  #define EXT_CSD_CMD_SET_SECURE         (1<<1)
>  #define EXT_CSD_CMD_SET_CPSECURE       (1<<2)
>
> -#define EXT_CSD_CARD_TYPE_26   (1<<0)  /* Card can run at 26MHz */
> -#define EXT_CSD_CARD_TYPE_52   (1<<1)  /* Card can run at 52MHz */
>  #define EXT_CSD_CARD_TYPE_MASK 0x3F    /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_HS_26        (1<<0)  /* Card can run at 26MHz */
> +#define EXT_CSD_CARD_TYPE_HS_52        (1<<1)  /* Card can run at 52MHz */
> +#define EXT_CSD_CARD_TYPE_HS   (EXT_CSD_CARD_TYPE_HS_26 | \
> +                                EXT_CSD_CARD_TYPE_HS_52)
>  #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
>                                              /* DDR mode @1.8V or 3V I/O */
>  #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
>                                              /* DDR mode @1.2V I/O */
>  #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
>                                         | EXT_CSD_CARD_TYPE_DDR_1_2V)
> -#define EXT_CSD_CARD_TYPE_SDR_1_8V     (1<<4)  /* Card can run at 200MHz */
> -#define EXT_CSD_CARD_TYPE_SDR_1_2V     (1<<5)  /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_HS200_1_8V   (1<<4)  /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_HS200_1_2V   (1<<5)  /* Card can run at 200MHz */
>                                                 /* SDR mode @1.2V I/O */
> +#define EXT_CSD_CARD_TYPE_HS200                (EXT_CSD_CARD_TYPE_HS200_1_8V | \
> +                                        EXT_CSD_CARD_TYPE_HS200_1_2V)
>
>  #define EXT_CSD_BUS_WIDTH_1    0       /* Card is in 1 bit mode */
>  #define EXT_CSD_BUS_WIDTH_4    1       /* Card is in 4 bit mode */
> --
> 1.7.0.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux