Hi Grant, We work on V2, and Avi will post it in few coming days. Thanks, Alex > -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Grant Grundler > Sent: Tuesday, April 01, 2014 11:30 PM > To: Grant Grundler > Cc: Jaehoon Chung; Seunguk Shin; linux-mmc@xxxxxxxxxxxxxxx; Avi > Shchislowski; Chris Ball; CPGS; Puthikorn Voravootivat; Gwendal Grignou > Subject: Re: [RFC PATCH 1/1 ]mmc: Support-FFU-for-eMMC-v5.0 > > argh...reposting my response as text only since linux-mmc doesn't like html > mail. :( > > On Tue, Apr 1, 2014 at 1:26 PM, Grant Grundler <grundler@xxxxxxxxxxxx> > wrote: > > > > > > > > On Mon, Mar 31, 2014 at 9:17 PM, Jaehoon Chung > > <jh80.chung@xxxxxxxxxxx> > > wrote: > >> > >> Hi, Seunguk. > >> > >> On 03/31/2014 07:51 PM, Seunguk Shin wrote: > >> > Some of Samsung eMMC does not show the argument for ffu in ext_csd. > >> > In case of this, eMMC shows 0x0 from ext_csd, Host has to modify > >> > the argument. > >> > > >> > Add "#define CID_MANFID_SAMSUNG 0x15" > >> If you need to add the Samsung eMMC specific code, it would be better > >> you would send the Samsung eMMC specific patch. > >> (based-on this patch.) > > > > > > I believe Seunguk Shin provided the information so someone else could > > add this code. I could be that person if no one from Samsung has have > > time for this. I'm very grateful to Seungguk for posting these details. > > > > I hope we can see the same details for Samsung eMMC 4.5 also (but > > please use a different email Subject line so we aren't confused.) > > > >> This patch isn't patch for samsung eMMC. > >> I didn't see this patch fully, but i think this patch is general code. > > > > > > AFAICT, the MANFID_SAMSUNG is only a "quirk" for Samsung devices > which > > specify the EXT_CSD_FFU_ARG as 0. > > > > The original patch from SanDisk is general code and most of Seunguk's > > comments are general too. SanDisk (ie Avi) should please ACK they've > > seen those comments since I believe Seunguk is correct. > > > > And Avi, please let us know if/when you plan on posting a V2. Or at > > least not be offended if I get impatient and hijack this patch series. > > :) > > > > cheers, > > grant > > > >> Best Regards, > >> Jaehoon Chung > >> > >> > > >> >> +int mmc_ffu_download(struct mmc_card *card, struct > mmc_command *cmd, > >> >> + u8 *data, int buf_bytes) > >> >> +{ > >> >> + u8 ext_csd[CARD_BLOCK_SIZE]; > >> >> + int err; > >> >> + int ret; > >> >> + > >> >> + /* Read the EXT_CSD */ > >> >> + err = mmc_send_ext_csd(card, ext_csd); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d sending ext_csd\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> >> + > >> >> + /* Check if FFU is supported by card */ > >> >> + if > (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE])) { > >> >> + err = -EINVAL; > >> >> + pr_err("FFU: %s: error %d FFU is not supported\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> >> + > >> >> + err = mmc_host_set_ffu(card, ext_csd[EXT_CSD_FW_CONFIG]); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d FFU is not supported\n", > >> >> + mmc_hostname(card->host), err); > >> >> + err = -EINVAL; > >> >> + goto exit; > >> >> + } > >> >> + > >> >> + /* set device to FFU mode */ > >> >> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > >> > EXT_CSD_MODE_CONFIG, > >> >> + MMC_FFU_MODE_SET, card->ext_csd.generic_cmd6_time); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d FFU is not supported\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit_normal; > >> >> + } > >> >> + > >> >> + /* set CMD ARG */ > >> >> + cmd->arg = ext_csd[EXT_CSD_FFU_ARG] | > >> >> + ext_csd[EXT_CSD_FFU_ARG + 1] << 8 | > >> >> + ext_csd[EXT_CSD_FFU_ARG + 2] << 16 | > >> >> + ext_csd[EXT_CSD_FFU_ARG + 3] << 24; > >> >> + > >> > > >> > Add followings > >> > " > >> > /* If arg is zero, should be set to a special value for > >> > samsung eMMC */ > >> > if ( card->cid.manfid == CID_MANFID_SAMSUNG && cmd->arg == > >> > 0x0 ) { > >> > cmd->arg = 0xc7810000; > >> > } > >> > " > >> > > >> >> + err = mmc_ffu_write(card, data, cmd->arg, buf_bytes); > >> >> + > >> >> +exit_normal: > >> >> + /* host switch back to work in normal MMC Read/Write > >> >> +commands > >> >> */ > >> >> + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > >> >> + EXT_CSD_MODE_CONFIG, MMC_FFU_MODE_NORMAL, > >> >> + card->ext_csd.generic_cmd6_time); > >> >> + if (ret) > >> >> + err = ret; > >> >> + > >> >> +exit: > >> >> + return err; > >> >> +} > >> >> +EXPORT_SYMBOL(mmc_ffu_download); > >> >> + > >> > > >> > > >> > > >> > eMMC 5.0 Spec. says if device does not support > >> > MODE_OPERATION_CODES, device doesn't need to use > >> > NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED. > >> > So, it's better to move the code for checking this value to > >> > FFU_FEATURES(ext_csd[EXT_CSD_FFU_FEATURES] > >> > > >> >> +int mmc_ffu_install(struct mmc_card *card) { > >> >> + u8 ext_csd[CARD_BLOCK_SIZE]; > >> >> + int err; > >> >> + u32 ffu_data_len; > >> >> + u32 timeout; > >> >> + > >> >> + err = mmc_send_ext_csd(card, ext_csd); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d sending ext_csd\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> >> + > >> >> + /* Check if FFU is supported */ > >> >> + if > (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE]) || > >> >> + FFU_CONFIG(ext_csd[EXT_CSD_FW_CONFIG])) { > >> >> + err = -EINVAL; > >> >> + pr_err("FFU: %s: error %d FFU is not supported\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> > > >> > Remove followings > >> > " > >> > ffu_data_len = ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG]| > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 1] << 8 | > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 2] << 16 | > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 3] << 24; > >> > > >> > if (!ffu_data_len) { > >> > err = -EPERM; > >> > return err; > >> > } > >> > " > >> > > >> >> + > >> >> + /* check mode operation */ > >> >> + if (!FFU_FEATURES(ext_csd[EXT_CSD_FFU_FEATURES])) { > >> >> + /* restart the eMMC */ > >> >> + err = mmc_ffu_restart(card); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d FFU install:\n", > >> >> + mmc_hostname(card->host), err); > >> >> + } > >> >> + } else { > >> > > >> > Add followings > >> > " > >> > ffu_data_len = > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG]| > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG > >> > + 1] << 8 > >> > | > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG > >> > + 2] << > >> > 16 | > >> > ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG > >> > + 3] << 24; > >> > > >> > if (!ffu_data_len) { > >> > err = -EPERM; > >> > return err; > >> > } > >> > " > >> > > >> >> + /* set device to FFU mode */ > >> >> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > >> >> + EXT_CSD_MODE_CONFIG, 0x1, > >> >> + card->ext_csd.generic_cmd6_time); > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d FFU is > >> >> + not > >> > supported\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> > > >> > > >> > > >> > Checking ffu status in ext_csd should be done even if device does > >> > not support MODE_OPERATION_CODES So, it's better to move the code > >> > for checking this value to out of brace for > >> > FFU_FEATURES(ext_csd[EXT_CSD_FFU_FEATURES] > >> > > >> >> + /* set ext_csd to install mode */ > >> >> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > >> >> + EXT_CSD_MODE_OPERATION_CODES, > >> >> + MMC_FFU_INSTALL_SET, timeout); > >> >> + > >> >> + if (err) { > >> >> + pr_err("FFU: %s: error %d setting > >> >> install > >> > mode\n", > >> >> + mmc_hostname(card->host), err); > >> >> + goto exit; > >> >> + } > >> >> + > >> > > >> > Remove followings > >> > " > >> > /* read ext_csd */ > >> > err = mmc_send_ext_csd(card, ext_csd); > >> > if (err) { > >> > pr_err("FFU: %s: error %d sending > >> > ext_csd\n", > >> > mmc_hostname(card->host), err); > >> > goto exit; > >> > } > >> > /* return status */ > >> > err = ext_csd[EXT_CSD_FFU_STATUS]; > >> > if (err) { > >> > pr_err("FFU: %s: error %d FFU > >> > install:\n", > >> > mmc_hostname(card->host), err); > >> > err = -EINVAL; > >> > goto exit; > >> > } > >> > " > >> > > >> >> + } > >> >> + > >> > > >> > Add followings > >> > " > >> > /* read ext_csd */ > >> > err = mmc_send_ext_csd(card, ext_csd); > >> > if (err) { > >> > pr_err("FFU: %s: error %d sending ext_csd\n", > >> > mmc_hostname(card->host), err); > >> > goto exit; > >> > } > >> > /* return status */ > >> > err = ext_csd[EXT_CSD_FFU_STATUS]; > >> > if (err) { > >> > pr_err("FFU: %s: error %d FFU install:\n", > >> > mmc_hostname(card->host), err); > >> > err = -EINVAL; > >> > goto exit; > >> > } > >> > " > >> > > >> >> +exit: > >> >> + return err; > >> >> +} > >> >> +EXPORT_SYMBOL(mmc_ffu_install); > >> >> + > >> > > >> > > >> > > >> > And some device's fw should be transferred with one command. > >> > They does not support multiple commands for fw transfer. > >> > For these devices, MMC_IOC_MAX_BYTES should be greater. > >> > > >> > diff --git a/include/uapi/linux/mmc/ioctl.h > >> > b/include/uapi/linux/mmc/ioctl.h index 1f5e689..af9ea62 100644 > >> > --- a/include/uapi/linux/mmc/ioctl.h > >> > +++ b/include/uapi/linux/mmc/ioctl.h > >> > @@ -53,5 +53,5 @@ struct mmc_ioc_cmd { > >> > * is enforced per ioctl call. For larger data transfers, use the > >> > normal > >> > * block device operations. > >> > */ > >> > -#define MMC_IOC_MAX_BYTES (512L * 256) > >> > +#define MMC_IOC_MAX_BYTES (512L * 1024) > >> > #endif /* LINUX_MMC_IOCTL_H */ > >> > > >> > > >> > -- > >> > To unsubscribe from this list: send the line "unsubscribe > >> > linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx > >> > More majordomo info at http://vger.kernel.org/majordomo-info.html > >> > > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" > >> in the body of a message to majordomo@xxxxxxxxxxxxxxx More > majordomo > >> info at http://vger.kernel.org/majordomo-info.html > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the > body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at > http://vger.kernel.org/majordomo-info.html ��.n��������+%������w��{.n�����{��i��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
