Re: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28 February 2014 12:49, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> The sdio func device is added to the driver model after the card
> device.
>
> This means the sdio func device will be suspend before the card device
> and thus resumed after. The consequence are the mmc core don't
> explicity need to protect itself from receiving sdio requests in
> suspended state. Instead that can be handled from the sdio bus, which
> is thus invokes the PM callbacks instead of old dummy function.
>
> In the case were the sdio func driver don't implement the PM callbacks
> the mmc core will in the early phase of system suspend, remove the
> card from the driver model and thus power off it.
>
> Cc: Aaron Lu <aaron.lu@xxxxxxxxx>
> Cc: NeilBrown <neilb@xxxxxxx>
> Cc: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx>
> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> ---
>
> Note, this patch has only been compile tested. Would appreciate if some with
> SDIO and a sdio func driver could help out to test this. Especially the
> libertas driver would be nice.
>
> ---

Hi Chris,

Would be nice if you could pick this up for 3.15 and possibly send it
to "stable" as well.

It has been tested and reviewed, so I am confident that we are doing
the right thing here.

Kind regards
Uffe

>  drivers/mmc/core/sdio.c     |   45 ++++---------------------------------------
>  drivers/mmc/core/sdio_bus.c |   14 +-------------
>  2 files changed, 5 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index 4d721c6..9933e42 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -943,40 +943,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
>   */
>  static int mmc_sdio_suspend(struct mmc_host *host)
>  {
> -       int i, err = 0;
> -
> -       for (i = 0; i < host->card->sdio_funcs; i++) {
> -               struct sdio_func *func = host->card->sdio_func[i];
> -               if (func && sdio_func_present(func) && func->dev.driver) {
> -                       const struct dev_pm_ops *pmops = func->dev.driver->pm;
> -                       err = pmops->suspend(&func->dev);
> -                       if (err)
> -                               break;
> -               }
> -       }
> -       while (err && --i >= 0) {
> -               struct sdio_func *func = host->card->sdio_func[i];
> -               if (func && sdio_func_present(func) && func->dev.driver) {
> -                       const struct dev_pm_ops *pmops = func->dev.driver->pm;
> -                       pmops->resume(&func->dev);
> -               }
> -       }
> -
> -       if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
> +       if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
>                 mmc_claim_host(host);
>                 sdio_disable_wide(host->card);
>                 mmc_release_host(host);
>         }
>
> -       if (!err && !mmc_card_keep_power(host))
> +       if (!mmc_card_keep_power(host))
>                 mmc_power_off(host);
>
> -       return err;
> +       return 0;
>  }
>
>  static int mmc_sdio_resume(struct mmc_host *host)
>  {
> -       int i, err = 0;
> +       int err = 0;
>
>         BUG_ON(!host);
>         BUG_ON(!host->card);
> @@ -1019,24 +1000,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
>                 wake_up_process(host->sdio_irq_thread);
>         mmc_release_host(host);
>
> -       /*
> -        * If the card looked to be the same as before suspending, then
> -        * we proceed to resume all card functions.  If one of them returns
> -        * an error then we simply return that error to the core and the
> -        * card will be redetected as new.  It is the responsibility of
> -        * the function driver to perform further tests with the extra
> -        * knowledge it has of the card to confirm the card is indeed the
> -        * same as before suspending (same MAC address for network cards,
> -        * etc.) and return an error otherwise.
> -        */
> -       for (i = 0; !err && i < host->card->sdio_funcs; i++) {
> -               struct sdio_func *func = host->card->sdio_func[i];
> -               if (func && sdio_func_present(func) && func->dev.driver) {
> -                       const struct dev_pm_ops *pmops = func->dev.driver->pm;
> -                       err = pmops->resume(&func->dev);
> -               }
> -       }
> -
>         host->pm_flags &= ~MMC_PM_KEEP_POWER;
>         return err;
>  }
> diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
> index 92d1ba8..4fa8fef9 100644
> --- a/drivers/mmc/core/sdio_bus.c
> +++ b/drivers/mmc/core/sdio_bus.c
> @@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
>
>  #ifdef CONFIG_PM
>
> -#ifdef CONFIG_PM_SLEEP
> -static int pm_no_operation(struct device *dev)
> -{
> -       /*
> -        * Prevent the PM core from calling SDIO device drivers' suspend
> -        * callback routines, which it is not supposed to do, by using this
> -        * empty function as the bus type suspend callaback for SDIO.
> -        */
> -       return 0;
> -}
> -#endif
> -
>  static const struct dev_pm_ops sdio_bus_pm_ops = {
> -       SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
> +       SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
>         SET_RUNTIME_PM_OPS(
>                 pm_generic_runtime_suspend,
>                 pm_generic_runtime_resume,
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux