On Thu, March 13, 2014, Ulf Hansson wrote:
> On 7 March 2014 15:36, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> > Power class is changed once only after selection of bus modes
> > including speed and bus-width finishes finally.
> >
> > Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> > ---
> > Changes in v2:
> > Cleaned up some unnecessary codes.
> >
> > drivers/mmc/core/mmc.c | 94 +++++++++++++++++++++++++++--------------------
> > 1 files changed, 54 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> > index 0abece0..88ff217 100644
> > --- a/drivers/mmc/core/mmc.c
> > +++ b/drivers/mmc/core/mmc.c
> > @@ -737,17 +737,13 @@ static inline unsigned int mmc_snoop_ddr(struct mmc_card *card)
> > * extended CSD register, select it by executing the
> > * mmc_switch command.
> > */
> > -static int mmc_select_powerclass(struct mmc_card *card,
> > - unsigned int bus_width)
> > +static int __mmc_select_powerclass(struct mmc_card *card,
> > + unsigned int bus_width)
> > {
> > int err = 0;
> > unsigned int pwrclass_val = 0;
> > - struct mmc_host *host;
> > -
> > - BUG_ON(!card);
> > -
> > - host = card->host;
> > - BUG_ON(!host);
> > + struct mmc_host *host = card->host;
> > + struct mmc_ext_csd *ext_csd = &card->ext_csd;
> >
> > /* Power class selection is supported for versions >= 4.0 */
> > if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
> > @@ -759,14 +755,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
> >
> > switch (1 << host->ios.vdd) {
> > case MMC_VDD_165_195:
> > - if (host->ios.clock <= 26000000)
> > - pwrclass_val = card->ext_csd.raw_pwr_cl_26_195;
> > - else if (host->ios.clock <= 52000000)
> > + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
> > + pwrclass_val = ext_csd->raw_pwr_cl_26_195;
> > + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
> > pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
> > - card->ext_csd.raw_pwr_cl_52_195 :
> > - card->ext_csd.raw_pwr_cl_ddr_52_195;
> > - else if (host->ios.clock <= 200000000)
> > - pwrclass_val = card->ext_csd.raw_pwr_cl_200_195;
> > + ext_csd->raw_pwr_cl_52_195 :
> > + ext_csd->raw_pwr_cl_ddr_52_195;
> > + else if (host->ios.clock <= MMC_HS200_MAX_DTR)
> > + pwrclass_val = ext_csd->raw_pwr_cl_200_195;
> > break;
> > case MMC_VDD_27_28:
> > case MMC_VDD_28_29:
> > @@ -777,14 +773,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
> > case MMC_VDD_33_34:
> > case MMC_VDD_34_35:
> > case MMC_VDD_35_36:
> > - if (host->ios.clock <= 26000000)
> > - pwrclass_val = card->ext_csd.raw_pwr_cl_26_360;
> > - else if (host->ios.clock <= 52000000)
> > + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
> > + pwrclass_val = ext_csd->raw_pwr_cl_26_360;
> > + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
> > pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
> > - card->ext_csd.raw_pwr_cl_52_360 :
> > - card->ext_csd.raw_pwr_cl_ddr_52_360;
> > - else if (host->ios.clock <= 200000000)
> > - pwrclass_val = card->ext_csd.raw_pwr_cl_200_360;
> > + ext_csd->raw_pwr_cl_52_360 :
> > + ext_csd->raw_pwr_cl_ddr_52_360;
> > + else if (host->ios.clock <= MMC_HS200_MAX_DTR)
> > + pwrclass_val = ext_csd->raw_pwr_cl_200_360;
> > break;
> > default:
> > pr_warning("%s: Voltage range not supported "
> > @@ -810,6 +806,37 @@ static int mmc_select_powerclass(struct mmc_card *card,
> > return err;
> > }
> >
> > +static int mmc_select_powerclass(struct mmc_card *card)
> > +{
> > + int err, ddr;
> > + u32 bus_width, ext_csd_bits;
> > + struct mmc_host *host = card->host;
> > +
> > + /* Power class selection is supported for versions >= 4.0 */
> > + if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
> > + return 0;
> > +
> > + bus_width = host->ios.bus_width;
> > + /* Power class values are defined only for 4/8 bit bus */
> > + if (bus_width == MMC_BUS_WIDTH_1)
> > + return 0;
> > +
> > + ddr = mmc_snoop_ddr(card);
> > + if (ddr)
> > + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> > + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4;
> > + else
> > + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> > + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
> > +
> > + err = __mmc_select_powerclass(card, ext_csd_bits);
> > + if (err)
> > + pr_warn("%s: power class selection to bus width %d ddr %d failed\n",
> > + mmc_hostname(host), 1 << bus_width, ddr);
> > +
> > + return err;
> > +}
> > +
> > /*
> > * Selects the desired buswidth and switch to the HS200 mode
> > * if bus width set without error
> > @@ -1171,11 +1198,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> >
> > ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> > EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
> > - err = mmc_select_powerclass(card, ext_csd_bits);
> > - if (err)
> > - pr_warning("%s: power class selection to bus width %d"
> > - " failed\n", mmc_hostname(card->host),
> > - 1 << bus_width);
> > }
> >
> > /*
> > @@ -1204,12 +1226,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> > bus_width = bus_widths[idx];
> > if (bus_width == MMC_BUS_WIDTH_1)
> > ddr = 0; /* no DDR for 1-bit width */
> > - err = mmc_select_powerclass(card, ext_csd_bits[idx][0]);
> > - if (err)
> > - pr_warning("%s: power class selection to "
> > - "bus width %d failed\n",
> > - mmc_hostname(card->host),
> > - 1 << bus_width);
> >
> > err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> > EXT_CSD_BUS_WIDTH,
> > @@ -1234,13 +1250,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> > }
> >
> > if (!err && ddr) {
> > - err = mmc_select_powerclass(card, ext_csd_bits[idx][1]);
> > - if (err)
> > - pr_warning("%s: power class selection to "
> > - "bus width %d ddr %d failed\n",
> > - mmc_hostname(card->host),
> > - 1 << bus_width, ddr);
> > -
> > err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> > EXT_CSD_BUS_WIDTH,
> > ext_csd_bits[idx][1],
> > @@ -1278,6 +1287,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> > }
> >
> > /*
> > + * Choose the power calss with selected bus interface
>
> One line of comment is enough.
>
> "calss" -> "class".
OK.
>
> > + */
> > + mmc_select_powerclass(card);
> > +
> > + /*
> > * Enable HPI feature (if supported)
> > */
> > if (card->ext_csd.hpi) {
> > --
> > 1.7.0.4
> >
> >
>
> You should run checkpatch as well.
It think there was no warning & error in 3/5.
Ok. Let me check more.
>
> Besides these minor things, looks good - nice clean up!
Thanks,
Seungwon Jeon
>
> Kind regards
> Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
