On 7 March 2014 15:36, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> Device types which are supported by both host and device
> can be identified when EXT_CSD is read. There is no need to
> check host's capability anymore.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> ---
> Changes in v2:
> Just rebased with latest one.
>
> drivers/mmc/core/mmc.c | 77 ++++++++++++++++++++++++++-------------------
> include/linux/mmc/card.h | 6 ++-
> include/linux/mmc/host.h | 6 ---
> include/linux/mmc/mmc.h | 12 +++++--
> 4 files changed, 56 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index db9655f..0abece0 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -243,28 +243,46 @@ static void mmc_select_card_type(struct mmc_card *card)
> u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
> u32 caps = host->caps, caps2 = host->caps2;
> unsigned int hs_max_dtr = 0;
> + unsigned int avail_type = 0;
>
> - if (card_type & EXT_CSD_CARD_TYPE_26)
> + if (caps & MMC_CAP_MMC_HIGHSPEED &&
> + card_type & EXT_CSD_CARD_TYPE_HS_26) {
> hs_max_dtr = MMC_HIGH_26_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_HS_26;
> + }
>
> if (caps & MMC_CAP_MMC_HIGHSPEED &&
> - card_type & EXT_CSD_CARD_TYPE_52)
> + card_type & EXT_CSD_CARD_TYPE_HS_52) {
> hs_max_dtr = MMC_HIGH_52_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_HS_52;
> + }
>
> - if ((caps & MMC_CAP_1_8V_DDR &&
> - card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
> - (caps & MMC_CAP_1_2V_DDR &&
> - card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
> + if (caps & MMC_CAP_1_8V_DDR &&
> + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
> hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
> + }
>
> - if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
> - card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
> - (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
> - card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
> + if (caps & MMC_CAP_1_2V_DDR &&
> + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
> + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V;
> + }
> +
> + if (caps2 & MMC_CAP2_HS200_1_8V_SDR &&
> + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) {
> hs_max_dtr = MMC_HS200_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V;
> + }
> +
> + if (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
> + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) {
> + hs_max_dtr = MMC_HS200_MAX_DTR;
> + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V;
> + }
>
> card->ext_csd.hs_max_dtr = hs_max_dtr;
> - card->ext_csd.card_type = card_type;
> + card->mmc_avail_type = avail_type;
> }
>
> /*
> @@ -708,6 +726,11 @@ static struct device_type mmc_type = {
> .groups = mmc_attr_groups,
> };
>
> +static inline unsigned int mmc_snoop_ddr(struct mmc_card *card)
> +{
> + return card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52;
> +}
> +
Having a separate function for this seem a bit silly. Similar checks
is performed all over the code. I suggest you remove this.
> /*
> * Select the PowerClass for the current bus width
> * If power class is defined for 4/8 bit bus in the
> @@ -808,12 +831,10 @@ static int mmc_select_hs200(struct mmc_card *card)
>
> host = card->host;
>
> - if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
> - host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
> + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
> err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
>
> - if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
> - host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
> + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
> err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
>
> /* If fails try again during next card power cycle */
> @@ -1072,10 +1093,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> */
> if (card->ext_csd.hs_max_dtr != 0) {
> err = 0;
> - if (card->ext_csd.hs_max_dtr > 52000000 &&
> - host->caps2 & MMC_CAP2_HS200)
> + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
> err = mmc_select_hs200(card);
> - else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS)
> err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_HS_TIMING, 1,
> card->ext_csd.generic_cmd6_time,
> @@ -1089,13 +1109,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> mmc_hostname(card->host));
> err = 0;
> } else {
> - if (card->ext_csd.hs_max_dtr > 52000000 &&
> - host->caps2 & MMC_CAP2_HS200) {
> + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
> mmc_set_timing(card->host,
> MMC_TIMING_MMC_HS200);
> - } else {
> + else
> mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> - }
> }
> }
>
> @@ -1118,14 +1136,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> /*
> * Indicate DDR mode (if supported).
> */
> - if (mmc_card_hs(card)) {
> - if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
> - && (host->caps & MMC_CAP_1_8V_DDR))
> - ddr = MMC_1_8V_DDR_MODE;
> - else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
> - && (host->caps & MMC_CAP_1_2V_DDR))
> - ddr = MMC_1_2V_DDR_MODE;
> - }
> + if (mmc_card_hs(card))
> + ddr = mmc_snoop_ddr(card);
>
> /*
> * Indicate HS200 SDR mode (if supported).
> @@ -1145,8 +1157,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> * 3. set the clock to > 52Mhz <=200MHz and
> * 4. execute tuning for HS200
> */
> - if ((host->caps2 & MMC_CAP2_HS200) &&
> - card->host->ops->execute_tuning) {
> + if (card->host->ops->execute_tuning) {
> mmc_host_clk_hold(card->host);
> err = card->host->ops->execute_tuning(card->host,
> MMC_SEND_TUNING_BLOCK_HS200);
> @@ -1255,7 +1266,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> *
> * WARNING: eMMC rules are NOT the same as SD DDR
> */
> - if (ddr == MMC_1_2V_DDR_MODE) {
> + if (ddr & EXT_CSD_CARD_TYPE_DDR_1_2V) {
> err = __mmc_set_signal_voltage(host,
> MMC_SIGNAL_VOLTAGE_120);
> if (err)
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 5473133..c232b10 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -68,7 +68,6 @@ struct mmc_ext_csd {
> #define MMC_HIGH_DDR_MAX_DTR 52000000
> #define MMC_HS200_MAX_DTR 200000000
> unsigned int sectors;
> - unsigned int card_type;
> unsigned int hc_erase_size; /* In sectors */
> unsigned int hc_erase_timeout; /* In milliseconds */
> unsigned int sec_trim_mult; /* Secure trim multiplier */
> @@ -297,7 +296,10 @@ struct mmc_card {
> const char **info; /* info strings */
> struct sdio_func_tuple *tuples; /* unknown common tuples */
>
> - unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
> + union {
> + unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
> + unsigned int mmc_avail_type; /* supported device type by both host and card */
Using a union here won't be that much of a gain since there are only
few instances of the struct. Please remove.
> + };
>
> struct dentry *debugfs_root;
> struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 2f263ae..1ee3c10 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -62,12 +62,6 @@ struct mmc_ios {
> #define MMC_TIMING_MMC_DDR52 8
> #define MMC_TIMING_MMC_HS200 9
>
> -#define MMC_SDR_MODE 0
> -#define MMC_1_2V_DDR_MODE 1
> -#define MMC_1_8V_DDR_MODE 2
> -#define MMC_1_2V_SDR_MODE 3
> -#define MMC_1_8V_SDR_MODE 4
> -
> unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
>
> #define MMC_SIGNAL_VOLTAGE_330 0
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 50bcde3..f734c0c 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -354,18 +354,22 @@ struct _mmc_csd {
> #define EXT_CSD_CMD_SET_SECURE (1<<1)
> #define EXT_CSD_CMD_SET_CPSECURE (1<<2)
>
> -#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
> -#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
> #define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
> +#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
> +#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
> + EXT_CSD_CARD_TYPE_HS_52)
> #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
> /* DDR mode @1.8V or 3V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
> /* DDR mode @1.2V I/O */
> #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
> | EXT_CSD_CARD_TYPE_DDR_1_2V)
> -#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
> -#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
> /* SDR mode @1.2V I/O */
> +#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
> + EXT_CSD_CARD_TYPE_HS200_1_2V)
>
> #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
> --
> 1.7.0.4
>
>
Besides the minor stuff, looks good.
Kind regards
Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
