Re: [PATCH 3/3] regulator: pbias: Convert to use regulator_[enable|is_enabled]_regmap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 07 March 2014 09:20 PM, Axel Lin wrote:
Since commit ca5d1b3524b4d
"regulator: helpers: Modify helpers enabling multi-bit control",
we can set enable_val setting for device that use multiple bits for control
when using regmap enable/disable/bypass ops.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
Note:
This patch depends on below commit which is only in regulator tree now:
http://git.kernel.org/cgit/linux/kernel/git/broonie/regulator.git/commit/?h=topic/enable

I sent this for reveiw and test now.
if it works, I'll resend it once 3.5-rc1 is released.
Hi,

I tested this series with above dependent commit and it works as excepted
So you can add my,
Tested-by: Balaji T K <balajitk@xxxxxx>

Thanks for doing regmap conversion, now pbias driver looks as minimal as possible.


  drivers/regulator/pbias-regulator.c | 25 +++----------------------
  1 file changed, 3 insertions(+), 22 deletions(-)

diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
index 6d38be3..708ddbb 100644
--- a/drivers/regulator/pbias-regulator.c
+++ b/drivers/regulator/pbias-regulator.c
@@ -49,33 +49,13 @@ static const unsigned int pbias_volt_table[] = {
  	3000000
  };

-static int pbias_regulator_enable(struct regulator_dev *rdev)
-{
-	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
-	const struct pbias_reg_info *info = data->info;
-
-	return regmap_update_bits(data->syscon, rdev->desc->enable_reg,
-				  info->enable_mask, info->enable);
-}
-
-static int pbias_regulator_is_enable(struct regulator_dev *rdev)
-{
-	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
-	const struct pbias_reg_info *info = data->info;
-	int value;
-
-	regmap_read(data->syscon, rdev->desc->enable_reg, &value);
-
-	return (value & info->enable_mask) == info->enable;
-}
-
  static struct regulator_ops pbias_regulator_voltage_ops = {
  	.list_voltage = regulator_list_voltage_table,
  	.get_voltage_sel = regulator_get_voltage_sel_regmap,
  	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.enable = pbias_regulator_enable,
+	.enable = regulator_enable_regmap,
  	.disable = regulator_disable_regmap,
-	.is_enabled = pbias_regulator_is_enable,
+	.is_enabled = regulator_is_enabled_regmap,
  };

  static const struct pbias_reg_info pbias_mmc_omap2430 = {
@@ -180,6 +160,7 @@ static int pbias_regulator_probe(struct platform_device *pdev)
  		drvdata[data_idx].desc.vsel_mask = info->vmode;
  		drvdata[data_idx].desc.enable_reg = res->start;
  		drvdata[data_idx].desc.enable_mask = info->enable_mask;
+		drvdata[data_idx].desc.enable_val = info->enable;

  		cfg.init_data = pbias_matches[idx].init_data;
  		cfg.driver_data = &drvdata[data_idx];


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux