Patch suggested by Dong Aisheng <dongas86@xxxxxxxxx>, this avoids
additional clock start/stop cycles during the transition to 1.8V
signalling mode.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
=-DO NOT APPLY-=
drivers/mmc/host/sdhci.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ddd57bc235ab..4b6ee2029604 100644
=-DO NOT APPLY-= a/drivers/mmc/host/sdhci.c
=+DO NOT APPLY+= b/drivers/mmc/host/sdhci.c
@@ -1507,12 +1507,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
host->ops->set_clock(host, host->clock);
}
-
- /* Reset SD Clock Enable */
- clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
- clk &= ~SDHCI_CLOCK_CARD_EN;
- sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
if (host->ops->set_uhs_signaling)
host->ops->set_uhs_signaling(host, ios->timing);
else {
@@ -1546,9 +1540,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
>> SDHCI_PRESET_DRV_SHIFT;
}
-
- /* Re-enable SD Clock */
- host->ops->set_clock(host, host->clock);
} else
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
@@ -1757,9 +1748,6 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ctrl |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
- /* Wait for 5ms */
- usleep_range(5000, 5500);
-
/* 1.8V regulator output should be stable within 5 ms */
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (ctrl & SDHCI_CTRL_VDD_180)
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
