The Freescale esdhc driver is the only driver which needs the interrupt
registers restored after a reset. Move this quirk to be part of the
ESDHC driver implementation.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
=-DO NOT APPLY-=
drivers/mmc/host/sdhci-esdhc-imx.c | 10 +++++++++-
drivers/mmc/host/sdhci-esdhc.h | 3 +--
drivers/mmc/host/sdhci.c | 5 -----
include/linux/mmc/sdhci.h | 2 --
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index b1d74fa33c5f..812c5772d900 100644
=-DO NOT APPLY-= a/drivers/mmc/host/sdhci-esdhc-imx.c
=+DO NOT APPLY+= b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -876,6 +876,14 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
return esdhc_change_pinstate(host, uhs);
}
=+DO NOT APPLY+=static void esdhc_reset(struct sdhci_host *host, u8 mask)
=+DO NOT APPLY+={
=+DO NOT APPLY+= sdhci_reset(host, mask);
=+DO NOT APPLY+=
=+DO NOT APPLY+= sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
=+DO NOT APPLY+= sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
=+DO NOT APPLY+=}
=+DO NOT APPLY+=
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl_le,
.read_w = esdhc_readw_le,
@@ -888,7 +896,7 @@ static struct sdhci_ops sdhci_esdhc_ops = {
.get_ro = esdhc_pltfm_get_ro,
.set_bus_width = esdhc_pltfm_set_bus_width,
.set_uhs_signaling = esdhc_set_uhs_signaling,
- .reset = sdhci_reset,
=+DO NOT APPLY+= .reset = esdhc_reset,
};
static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index a7d9f95a7b03..de69bddc3afc 100644
=-DO NOT APPLY-= a/drivers/mmc/host/sdhci-esdhc.h
=+DO NOT APPLY+= b/drivers/mmc/host/sdhci-esdhc.h
@@ -22,8 +22,7 @@
SDHCI_QUIRK_NO_BUSY_IRQ | \
SDHCI_QUIRK_NONSTANDARD_CLOCK | \
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
- SDHCI_QUIRK_PIO_NEEDS_DELAY | \
- SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
=+DO NOT APPLY+= SDHCI_QUIRK_PIO_NEEDS_DELAY)
#define ESDHC_SYSTEM_CONTROL 0x2c
#define ESDHC_CLOCK_MASK 0x0000fff0
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 10540192d544..bcf4f9ec0ea4 100644
=-DO NOT APPLY-= a/drivers/mmc/host/sdhci.c
=+DO NOT APPLY+= b/drivers/mmc/host/sdhci.c
@@ -203,11 +203,6 @@ static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
host->ops->reset(host, mask);
- if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) {
- sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
- sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
- }
-
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL))
host->ops->enable_dma(host);
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 493c57aee4cb..801579313789 100644
=-DO NOT APPLY-= a/include/linux/mmc/sdhci.h
=+DO NOT APPLY+= b/include/linux/mmc/sdhci.h
@@ -61,8 +61,6 @@ struct sdhci_host {
#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
-/* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
/* Controller has to be forced to use block size of 2048 bytes */
#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
/* Controller cannot do multi-block transfers */
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
