On 01/30, Georgi Djakov wrote:
> @@ -75,17 +110,389 @@ struct sdhci_msm_host {
> };
>
> /* MSM platform specific tuning */
> -int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
> +static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
> +{
> + u32 wait_cnt = 50;
> + u8 ck_out_en = 0;
Looks like a useless assignment.
> + struct mmc_host *mmc = host->mmc;
> +
> + /* poll for CK_OUT_EN bit. max. poll time = 50us */
> + ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
> + CORE_CK_OUT_EN);
> +
> + while (ck_out_en != poll) {
> + if (--wait_cnt == 0) {
> + dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n",
> + mmc_hostname(mmc), poll);
> + return -ETIMEDOUT;
> + }
> + udelay(1);
> +
> + ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
> + CORE_CK_OUT_EN);
> + }
> +
> + return 0;
> +}
> +
> +static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
> +{
> + int rc = 0;
Looks like a useless assignment.
> + u8 grey_coded_phase_table[] = {
> + 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
> + 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8
> + };
This could be static const?
> + unsigned long flags;
> + u32 config;
> + struct mmc_host *mmc = host->mmc;
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
> + config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
> + config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
> + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
> +
> + /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
> + rc = msm_dll_poll_ck_out_en(host, 0);
> + if (rc)
> + goto err_out;
> +
> + /*
> + * Write the selected DLL clock output phase (0 ... 15)
> + * to CDR_SELEXT bit field of DLL_CONFIG register.
> + */
> + writel_relaxed(((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
> + & ~(0xF << 20))
> + | (grey_coded_phase_table[phase] << 20)),
> + host->ioaddr + CORE_DLL_CONFIG);
Wow this is complicated. Can we please break this up into
multiple lines? What does 0xf << 20 mean?
> +
> + /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
> + writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
> + | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
> +
[...]
> +}
> +
> +static int msm_find_most_appropriate_phase(struct sdhci_host *host,
> + u8 *phase_table, u8 total_phases)
> +{
[...]
> +
> + for (cnt = 0; cnt <= row_index; cnt++) {
> + if (phases_per_row[cnt] > curr_max) {
> + curr_max = phases_per_row[cnt];
> + selected_row_index = cnt;
> + }
> + }
> +
> + i = ((curr_max * 3) / 4);
Unnecessary extra parentheses here.
> + if (i)
> + i--;
> +
> + ret = (int)ranges[selected_row_index][i];
Is this cast necessary?
> +
> + if (ret >= MAX_PHASES) {
> + ret = -EINVAL;
> + dev_err(mmc_dev(mmc), "%s: invalid phase selected=%d\n",
> + mmc_hostname(mmc), ret);
> + }
> +
> + return ret;
> +}
> +
> +static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
> +{
> + u32 mclk_freq = 0;
> +
> + /* Program the MCLK value to MCLK_FREQ bit field */
> + if (host->clock <= 112000000)
> + mclk_freq = 0;
> + else if (host->clock <= 125000000)
> + mclk_freq = 1;
> + else if (host->clock <= 137000000)
> + mclk_freq = 2;
> + else if (host->clock <= 150000000)
> + mclk_freq = 3;
> + else if (host->clock <= 162000000)
> + mclk_freq = 4;
> + else if (host->clock <= 175000000)
> + mclk_freq = 5;
> + else if (host->clock <= 187000000)
> + mclk_freq = 6;
> + else if (host->clock <= 200000000)
> + mclk_freq = 7;
This could be a case statement but I'm not sure it's any clearer.
At least the range is specified.
switch (host->clock) {
case 0 ... 112000000:
mclk_freq = 0;
break;
case 112000001 ... 125000000:
mclk_freq = 1;
break;
...
> +
> + writel_relaxed(((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
> + & ~(7 << 24)) | (mclk_freq << 24)),
> + host->ioaddr + CORE_DLL_CONFIG);
This is also complicated. Can you split this up into multiple lines?
> +int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
> +{
[...]
> + do {
> + struct mmc_command cmd = { 0 };
> + struct mmc_data data = { 0 };
> + struct mmc_request mrq = {
> + .cmd = &cmd,
> + .data = &data
> + };
> + struct scatterlist sg;
> +
> + /* set the phase in delay line hw block */
> + rc = msm_config_cm_dll_phase(host, phase);
> + if (rc)
> + goto out;
> +
> + cmd.opcode = opcode;
> + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
> +
> + data.blksz = size;
> + data.blocks = 1;
> + data.flags = MMC_DATA_READ;
> + data.timeout_ns = 1000 * 1000 * 1000; /* 1 sec */
NSEC_PER_SEC?
> +
> + data.sg = &sg;
> + data.sg_len = 1;
> + sg_init_one(&sg, data_buf, sizeof(data_buf));
> + memset(data_buf, 0, sizeof(data_buf));
> + mmc_wait_for_req(mmc, &mrq);
> +
> + if (!cmd.error && !data.error &&
> + !memcmp(data_buf, tuning_block_pattern, sizeof(data_buf))) {
> + /* tuning is successful at this tuning point */
> + tuned_phases[tuned_phase_cnt++] = phase;
> + dev_dbg(mmc_dev(mmc), "%s: found good phase = %d\n",
> + mmc_hostname(mmc), phase);
> + }
> + } while (++phase < 16);
++phase < ARRAY_SIZE(tuned_phases) ?
> +
> + if (tuned_phase_cnt) {
> + rc = msm_find_most_appropriate_phase(host, tuned_phases,
> + tuned_phase_cnt);
> + if (rc < 0)
> + goto out;
> + else
> + phase = (u8) rc;
Unnecessary cast?
> +
> + /*
> + * Finally set the selected phase in delay
> + * line hw block.
> + */
> + rc = msm_config_cm_dll_phase(host, phase);
> + if (rc)
> + goto out;
> + dev_dbg(mmc_dev(mmc), "%s: setting the tuning phase to %d\n",
> + mmc_hostname(mmc), phase);
> + } else {
> + if (--tuning_seq_cnt)
> + goto retry;
> + /* tuning failed */
> + dev_dbg(mmc_dev(mmc), "%s: no tuning point found\n",
> + mmc_hostname(mmc));
> + rc = -EIO;
> + }
> +
> +out:
> + kfree(data_buf);
> + return rc;
> +}
> +
> #define MAX_PROP_SIZE 32
> static int sdhci_msm_dt_parse_vreg_info(struct device *dev,
> struct sdhci_msm_reg_data *vreg, const char *vreg_name)
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
