Hi Seungwon,
Thanks for review.
On 01/28/2014 09:54 PM, Seungwon Jeon wrote:
> On Tue, January 28, 2014, Jaehoon Chung wrote:
>> It's right that check immediately whether host->bus_hz is assigned or not.
>> If drv_data->setup_clock is presented, then host->bus_hz should be set at there.
>> When setup_clock didn't present, assigned to value with clk_get_rate().
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>> ---
>> Changelog V2:
>> - When drv_data->setup_clock is present, set to bus_hz with it.
>>
>> drivers/mmc/host/dw_mmc.c | 39 +++++++++++++++++++--------------------
>> 1 file changed, 19 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 8193e21..ead2998 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -2427,10 +2427,27 @@ int dw_mci_probe(struct dw_mci *host)
>> ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
>> if (ret)
>> dev_warn(host->dev,
>> - "Unable to set bus rate to %ul\n",
>> + "Unable to set bus rate to %uHz\n",
>> host->pdata->bus_hz);
>> }
>> - host->bus_hz = clk_get_rate(host->ciu_clk);
>> +
>> + if (drv_data && drv_data->setup_clock) {
>> + ret = drv_data->setup_clock(host);
>> + if (ret) {
>> + dev_err(host->dev, "implementation specific \"
>> + "clock setup failed\n");
>> + goto err_clk_ciu;
>> + }
>> + } else {
>> + host->bus_hz = clk_get_rate(host->ciu_clk);
> host->bus_hz certainly should be touched at drv_data->setup_clock()?
> I think origin would be better.
> The others is good to me.
I understood what you mean. Maybe We can change the code at dw_mmc-exynos.c.
It's refered to host->ci_clk at dw_mmc-exynos.c.
But If ciu_clk didn't assign, clk's rate didn't get.
How about this? host->bus_hz was already assigned in dw_mmc.c.
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -117,9 +117,8 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
static int dw_mci_exynos_setup_clock(struct dw_mci *host)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
- unsigned long rate = clk_get_rate(host->ciu_clk);
- host->bus_hz = rate / (priv->ciu_div + 1);
+ host->bus_hz /= (priv->ciu_div + 1);
return 0;
}
Best Regards,
Jaehoon Chung
>
> Thanks,
> Seungwon Jeon
>
>> + }
>> + }
>> +
>> + if (!host->bus_hz) {
>> + dev_err(host->dev,
>> + "Platform data must supply bus speed\n");
>> + ret = -ENODEV;
>> + goto err_clk_ciu;
>> }
>>
>> if (drv_data && drv_data->init) {
>> @@ -2442,15 +2459,6 @@ int dw_mci_probe(struct dw_mci *host)
>> }
>> }
>>
>> - if (drv_data && drv_data->setup_clock) {
>> - ret = drv_data->setup_clock(host);
>> - if (ret) {
>> - dev_err(host->dev,
>> - "implementation specific clock setup failed\n");
>> - goto err_clk_ciu;
>> - }
>> - }
>> -
>> host->vmmc = devm_regulator_get_optional(host->dev, "vmmc");
>> if (IS_ERR(host->vmmc)) {
>> ret = PTR_ERR(host->vmmc);
>> @@ -2469,13 +2477,6 @@ int dw_mci_probe(struct dw_mci *host)
>> }
>> }
>>
>> - if (!host->bus_hz) {
>> - dev_err(host->dev,
>> - "Platform data must supply bus speed\n");
>> - ret = -ENODEV;
>> - goto err_regulator;
>> - }
>> -
>> host->quirks = host->pdata->quirks;
>>
>> spin_lock_init(&host->lock);
>> @@ -2619,8 +2620,6 @@ err_workqueue:
>> err_dmaunmap:
>> if (host->use_dma && host->dma_ops->exit)
>> host->dma_ops->exit(host);
>> -
>> -err_regulator:
>> if (host->vmmc)
>> regulator_disable(host->vmmc);
>>
>> --
>> 1.7.9.5
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
