RE: [PATCH v2 2/8] mmc: dw_mmc: use the mmc_of_parse() instead of local parser

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, January 28, 2014, Jaehoon Chung wrote:
> mmc_of_parse() have been already parsed the general capability.
> Didn't need to use the local parser.
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> ---
> Changelog V2:
> 	- None
> 
>  drivers/mmc/core/host.c   |    4 ++--
>  drivers/mmc/host/dw_mmc.c |   49 +--------------------------------------------
>  2 files changed, 3 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 5a82e81..4b81c93 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -429,9 +429,9 @@ int mmc_of_parse(struct mmc_host *host)
>  		host->pm_caps |= MMC_PM_KEEP_POWER;
>  	if (of_find_property(np, "enable-sdio-wakeup", &len))
>  		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
> -	if (of_find_property(np, "mmc-hs200-1_8v", NULL))
> +	if (of_find_property(np, "mmc-hs200-1_8v", &len))
>  		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
> -	if (of_find_property(np, "mmc-hs200-1_2v", NULL))
> +	if (of_find_property(np, "mmc-hs200-1_2v", &len))
>  		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
> 
>  	return 0;
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 55cd110..8193e21 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2046,21 +2046,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
>  	return quirks;
>  }
> 
> -/* find out bus-width for a given slot */
> -static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
> -{
> -	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
> -	u32 bus_wd = 1;
> -
> -	if (!np)
> -		return 1;
> -
> -	if (of_property_read_u32(np, "bus-width", &bus_wd))
> -		dev_err(dev, "bus-width property not found, assuming width"
> -			       " as 1\n");
> -	return bus_wd;
> -}
> -
>  /* find the write protect gpio for a given slot; or -1 if none specified */
>  static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
>  {
> @@ -2108,10 +2093,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
>  {
>  	return 0;
>  }
> -static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
> -{
> -	return 1;
> -}
>  static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
>  {
>  	return NULL;
> @@ -2134,7 +2115,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  	const struct dw_mci_drv_data *drv_data = host->drv_data;
>  	int ctrl_id, ret;
>  	u32 freq[2];
> -	u8 bus_width;
> 
>  	mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
>  	if (!mmc)
> @@ -2189,19 +2169,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  	if (host->pdata->caps2)
>  		mmc->caps2 = host->pdata->caps2;
> 
> -	if (host->pdata->get_bus_wd)
> -		bus_width = host->pdata->get_bus_wd(slot->id);
> -	else if (host->dev->of_node)
> -		bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
> -	else
> -		bus_width = 1;
> -
> -	switch (bus_width) {
> -	case 8:
> -		mmc->caps |= MMC_CAP_8_BIT_DATA;
> -	case 4:
> -		mmc->caps |= MMC_CAP_4_BIT_DATA;
> -	}
> +	mmc_of_parse(mmc);
> 
>  	if (host->pdata->blk_settings) {
>  		mmc->max_segs = host->pdata->blk_settings->max_segs;
> @@ -2399,24 +2367,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>  			return ERR_PTR(ret);
>  	}
> 
> -	if (of_find_property(np, "keep-power-in-suspend", NULL))
> -		pdata->pm_caps |= MMC_PM_KEEP_POWER;
> -
> -	if (of_find_property(np, "enable-sdio-wakeup", NULL))
> -		pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
> -
>  	if (of_find_property(np, "supports-highspeed", NULL))
>  		pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
> 
> -	if (of_find_property(np, "caps2-mmc-hs200-1_8v", NULL))
> -		pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
> -
> -	if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
> -		pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
Can you remove caps2-mmc-hs200-1_8v and caps2-mmc-hs200-1_2v in Documentation(synopsys-dw-mshc.txt)?

Thanks,
Seungwon Jeon
> -
> -	if (of_get_property(np, "cd-inverted", NULL))
> -		pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
> -
>  	return pdata;
>  }
> 
> --
> 1.7.9.5
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux