Hi Adrian, On Mon, Jan 13 2014, Adrian Hunter wrote: > A host controller for a SD card may need a GPIO > for card detect in order to wake up from runtime > suspend when a card is inserted. If that GPIO is > not configured, then the host controller will not > wake up. Fix that for the affected devices by not > enabling runtime PM unless the GPIO is successfully > set up. > > This affects BYT sd card host controller which had > runtime PM enabled from v3.11. For completeness, > the MFD sd card host controller is flagged also. > > The original patch before rebasing (see link below) > was tested on v3.11.10 and v3.12.4 although the > patch applied with some offsets and fuzz. The > original patch is here: > > http://marc.info/?l=linux-mmc&m=138676702327057) was tested on v3.11.10 and v3.12.4 > > Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > --- > > V3: Update comments to reflect that the original patch > applies to stable trees whereas the rebased patch does > not. > > V2: Rebased Thanks, pushed v3 to mmc-next for 3.14. Looks like you lost the stable@ tag in v3 (and have a mispaste after the URL), so I added it back and cleared up the text. - Chris. -- Chris Ball <chris@xxxxxxxxxx> <http://printf.net/> -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
