On Wednesday 15 January 2014 21:56:26 zhangfei wrote: > However, in our board cd =0 when card is deteced while cd=1 when card is > removed. > In order to mmc_gpio_get_cd return 1, MMC_CAP2_CD_ACTIVE_HIGH has to be > set, as well as new property "caps2-mmc-cd-active-low". > > --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > @@ -73,6 +73,8 @@ Optional properties: > +* caps2-mmc-cd-active-low: cd pin is low when card active > + > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > + if (of_find_property(np, "caps2-mmc-cd-active-low", NULL)) > + pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; > + The MMC_CAP2_CD_ACTIVE_HIGH flag should only be required for legacy platforms. With DT parsing, you can normally specify the polarity of the GPIO line in the GPIO specifier in DT. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
