v7: 0002: use undefined local value in suspend/resume v6: 0002: Jaehoon pointed HIGHSPEED cap can be omitted if supports-highspeed is defined. Seungwon mentioned clk operation should be called after suspend. Remove k3_dwmmc_caps V5: 0002: Follow advice from Arnd, Update dt descirption and use of_property_for_each_u32 to get table number. v4: Follow Arnd's suggestion abstracting specific tuning to clock, also because new version ip use different method and not use same tuning registers. 0001 acked by Jaehoon v3: 0001: Put set/clear_bit DW_MMC_CARD_PRESENT in dw_mci_get_cd, Since dw_mci_request will check DW_MMC_CARD_PRESENT before sending cmd 0002: Follow suggestion from Chris, Kumar and Seungwon Sync to latest mmc-next, which is 3.12-rc2 Remove enum dw_mci_k3_type etc v2: Follow Jaehoon's suggestion Use slot-gpio.c handle cd pin Move table out to dts other suggestion Zhangfei Gao (3): mmc: dw_mmc: use slot-gpio to handle cd pin mmc: dw_mmc: add dw_mmc-k3 for k3 platform clk: hisilicon: add hi3620_mmc_clks .../bindings/arm/hisilicon/hisilicon.txt | 14 ++ .../devicetree/bindings/clock/hi3620-clock.txt | 1 + .../devicetree/bindings/mmc/k3-dw-mshc.txt | 60 +++++ drivers/clk/hisilicon/clk-hi3620.c | 262 ++++++++++++++++++++ drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc-k3.c | 126 ++++++++++ drivers/mmc/host/dw_mmc.c | 48 +++- include/dt-bindings/clock/hi3620-clock.h | 5 + 9 files changed, 514 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt create mode 100644 drivers/mmc/host/dw_mmc-k3.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
