Sometimes we may meet the following lockdep issue.
The root cause is .set_clock callback is executed with spin_lock_irqsave
in sdhci_do_set_ios. However, the IMX set_clock callback will try to access
clk_get_rate which is using a mutex lock.
The fix avoids access mutex in .set_clock callback by initializing the
pltfm_host->clock at probe time and use it later instead of calling
clk_get_rate again in atomic context.
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.13.0-rc1+ #285 Not tainted
------------------------------------------------------
kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
(prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4
and this task is already holding:
(&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720
which would create a new lock dependency:
(&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&(&host->lock)->rlock#2){-.-...}
... which became HARDIRQ-irq-safe at:
[<8005f030>] mark_lock+0x140/0x6ac
[<80060760>] __lock_acquire+0xb30/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061d2f0>] _raw_spin_lock+0x30/0x40
[<80460668>] sdhci_irq+0x24/0xa68
[<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
[<8006b350>] handle_irq_event+0x44/0x64
[<8006e50c>] handle_fasteoi_irq+0xa0/0x170
[<8006a8f0>] generic_handle_irq+0x30/0x44
[<8000f238>] handle_IRQ+0x54/0xbc
[<8000864c>] gic_handle_irq+0x30/0x64
[<80013024>] __irq_svc+0x44/0x5c
[<80614c58>] printk+0x38/0x40
[<804622a8>] sdhci_add_host+0x844/0xbcc
[<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
[<8032ee88>] platform_drv_probe+0x20/0x50
[<8032d48c>] driver_probe_device+0x118/0x234
[<8032d690>] __driver_attach+0x9c/0xa0
[<8032b89c>] bus_for_each_dev+0x68/0x9c
[<8032cf44>] driver_attach+0x20/0x28
[<8032cbc8>] bus_add_driver+0x148/0x1f4
[<8032dce0>] driver_register+0x80/0x100
[<8032ee54>] __platform_driver_register+0x50/0x64
[<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
to a HARDIRQ-irq-unsafe lock:
(prepare_lock){+.+...}
... which became HARDIRQ-irq-unsafe at:
... [<8005f030>] mark_lock+0x140/0x6ac
[<8005f604>] mark_held_locks+0x68/0x12c
[<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
[<8005f8b4>] trace_hardirqs_on+0x14/0x18
[<8061a130>] mutex_trylock+0x180/0x20c
[<80480ad8>] clk_prepare_lock+0x14/0xe4
[<804816a4>] clk_notifier_register+0x28/0xf0
[<80015120>] twd_clk_init+0x50/0x68
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(prepare_lock);
local_irq_disable();
lock(&(&host->lock)->rlock#2);
lock(prepare_lock);
<Interrupt>
lock(&(&host->lock)->rlock#2);
*** DEADLOCK ***
3 locks held by kworker/u8:1/29:
#0: (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468
#1: ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468
#2: (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720
the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&host->lock)->rlock#2){-.-...} ops: 330 {
IN-HARDIRQ-W at:
[<8005f030>] mark_lock+0x140/0x6ac
[<80060760>] __lock_acquire+0xb30/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061d2f0>] _raw_spin_lock+0x30/0x40
[<80460668>] sdhci_irq+0x24/0xa68
[<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
[<8006b350>] handle_irq_event+0x44/0x64
[<8006e50c>] handle_fasteoi_irq+0xa0/0x170
[<8006a8f0>] generic_handle_irq+0x30/0x44
[<8000f238>] handle_IRQ+0x54/0xbc
[<8000864c>] gic_handle_irq+0x30/0x64
[<80013024>] __irq_svc+0x44/0x5c
[<80614c58>] printk+0x38/0x40
[<804622a8>] sdhci_add_host+0x844/0xbcc
[<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
[<8032ee88>] platform_drv_probe+0x20/0x50
[<8032d48c>] driver_probe_device+0x118/0x234
[<8032d690>] __driver_attach+0x9c/0xa0
[<8032b89c>] bus_for_each_dev+0x68/0x9c
[<8032cf44>] driver_attach+0x20/0x28
[<8032cbc8>] bus_add_driver+0x148/0x1f4
[<8032dce0>] driver_register+0x80/0x100
[<8032ee54>] __platform_driver_register+0x50/0x64
[<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
IN-SOFTIRQ-W at:
[<8005f030>] mark_lock+0x140/0x6ac
[<80060204>] __lock_acquire+0x5d4/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
[<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120
[<8002b538>] tasklet_action+0xa0/0x15c
[<8002b778>] __do_softirq+0x118/0x290
[<8002bcf4>] irq_exit+0xb4/0x10c
[<8000f240>] handle_IRQ+0x5c/0xbc
[<8000864c>] gic_handle_irq+0x30/0x64
[<80013024>] __irq_svc+0x44/0x5c
[<80614c58>] printk+0x38/0x40
[<804622a8>] sdhci_add_host+0x844/0xbcc
[<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
[<8032ee88>] platform_drv_probe+0x20/0x50
[<8032d48c>] driver_probe_device+0x118/0x234
[<8032d690>] __driver_attach+0x9c/0xa0
[<8032b89c>] bus_for_each_dev+0x68/0x9c
[<8032cf44>] driver_attach+0x20/0x28
[<8032cbc8>] bus_add_driver+0x148/0x1f4
[<8032dce0>] driver_register+0x80/0x100
[<8032ee54>] __platform_driver_register+0x50/0x64
[<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
INITIAL USE at:
[<8005f030>] mark_lock+0x140/0x6ac
[<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
[<804611f4>] sdhci_do_set_ios+0x20/0x720
[<80461924>] sdhci_set_ios+0x30/0x3c
[<8044cea0>] mmc_power_up+0x6c/0xd0
[<8044dac4>] mmc_start_host+0x60/0x70
[<8044eb3c>] mmc_add_host+0x60/0x88
[<8046225c>] sdhci_add_host+0x7f8/0xbcc
[<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
[<8032ee88>] platform_drv_probe+0x20/0x50
[<8032d48c>] driver_probe_device+0x118/0x234
[<8032d690>] __driver_attach+0x9c/0xa0
[<8032b89c>] bus_for_each_dev+0x68/0x9c
[<8032cf44>] driver_attach+0x20/0x28
[<8032cbc8>] bus_add_driver+0x148/0x1f4
[<8032dce0>] driver_register+0x80/0x100
[<8032ee54>] __platform_driver_register+0x50/0x64
[<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
}
... key at: [<80e040e8>] __key.26952+0x0/0x8
... acquired at:
[<8005eb60>] check_usage+0x3d0/0x5c0
[<8005edac>] check_irq_usage+0x5c/0xb8
[<80060d38>] __lock_acquire+0x1108/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061a210>] mutex_lock_nested+0x54/0x3c0
[<80480b08>] clk_prepare_lock+0x44/0xe4
[<8048188c>] clk_get_rate+0x14/0x64
[<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
[<8045d70c>] sdhci_set_clock+0x4c/0x498
[<80461518>] sdhci_do_set_ios+0x344/0x720
[<80461924>] sdhci_set_ios+0x30/0x3c
[<8044c390>] __mmc_set_clock+0x44/0x60
[<8044cd4c>] mmc_set_clock+0x10/0x14
[<8044f8f4>] mmc_init_card+0x1b4/0x1520
[<80450f00>] mmc_attach_mmc+0xb4/0x194
[<8044da08>] mmc_rescan+0x294/0x2f0
[<8003db94>] process_one_work+0x1a4/0x468
[<8003e850>] worker_thread+0x118/0x3e0
[<80044de0>] kthread+0xd4/0xf0
[<8000e9c8>] ret_from_fork+0x14/0x2c
the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock:
-> (prepare_lock){+.+...} ops: 395 {
HARDIRQ-ON-W at:
[<8005f030>] mark_lock+0x140/0x6ac
[<8005f604>] mark_held_locks+0x68/0x12c
[<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
[<8005f8b4>] trace_hardirqs_on+0x14/0x18
[<8061a130>] mutex_trylock+0x180/0x20c
[<80480ad8>] clk_prepare_lock+0x14/0xe4
[<804816a4>] clk_notifier_register+0x28/0xf0
[<80015120>] twd_clk_init+0x50/0x68
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
SOFTIRQ-ON-W at:
[<8005f030>] mark_lock+0x140/0x6ac
[<8005f604>] mark_held_locks+0x68/0x12c
[<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8
[<8005f8b4>] trace_hardirqs_on+0x14/0x18
[<8061a130>] mutex_trylock+0x180/0x20c
[<80480ad8>] clk_prepare_lock+0x14/0xe4
[<804816a4>] clk_notifier_register+0x28/0xf0
[<80015120>] twd_clk_init+0x50/0x68
[<80008980>] do_one_initcall+0x108/0x16c
[<8081cca4>] kernel_init_freeable+0x10c/0x1d0
[<80611c50>] kernel_init+0x10/0x120
[<8000e9c8>] ret_from_fork+0x14/0x2c
INITIAL USE at:
[<8005f030>] mark_lock+0x140/0x6ac
[<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061a0c8>] mutex_trylock+0x118/0x20c
[<80480ad8>] clk_prepare_lock+0x14/0xe4
[<80482af8>] __clk_init+0x1c/0x45c
[<8048306c>] _clk_register+0xd0/0x170
[<80483148>] clk_register+0x3c/0x7c
[<80483b4c>] clk_register_fixed_rate+0x88/0xd8
[<80483c04>] of_fixed_clk_setup+0x68/0x94
[<8084c6fc>] of_clk_init+0x44/0x68
[<808202b0>] time_init+0x2c/0x38
[<8081ca14>] start_kernel+0x1e4/0x368
[<10008074>] 0x10008074
}
... key at: [<808afebc>] prepare_lock+0x38/0x48
... acquired at:
[<8005eb94>] check_usage+0x404/0x5c0
[<8005edac>] check_irq_usage+0x5c/0xb8
[<80060d38>] __lock_acquire+0x1108/0x1cbc
[<800620d0>] lock_acquire+0x70/0x84
[<8061a210>] mutex_lock_nested+0x54/0x3c0
[<80480b08>] clk_prepare_lock+0x44/0xe4
[<8048188c>] clk_get_rate+0x14/0x64
[<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
[<8045d70c>] sdhci_set_clock+0x4c/0x498
[<80461518>] sdhci_do_set_ios+0x344/0x720
[<80461924>] sdhci_set_ios+0x30/0x3c
[<8044c390>] __mmc_set_clock+0x44/0x60
[<8044cd4c>] mmc_set_clock+0x10/0x14
[<8044f8f4>] mmc_init_card+0x1b4/0x1520
[<80450f00>] mmc_attach_mmc+0xb4/0x194
[<8044da08>] mmc_rescan+0x294/0x2f0
[<8003db94>] process_one_work+0x1a4/0x468
[<8003e850>] worker_thread+0x118/0x3e0
[<80044de0>] kthread+0xd4/0xf0
[<8000e9c8>] ret_from_fork+0x14/0x2c
stack backtrace:
CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200
[<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c)
[<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0)
r5:80979940 r4:bfa29b44
[<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8)
[<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc)
r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0)
r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08
[<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4)
[<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64)
r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128
[<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4)
r5:bf0e9aa8 r4:bf0e9c40
[<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498)
[<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720)
r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40
r3:00000000
[<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c)
r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8
r4:bf0e9800
[<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60)
r5:03197500 r4:bf0e9800
[<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14)
r5:00000000 r4:bf0e9800
[<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520)
[<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194)
[<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0)
r5:8065f358 r4:bf0e9af8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00
Cc: Chris Ball <cjb@xxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree
Signed-off-by: Dong Aisheng <b29396@xxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2a04847..745ee1e 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -576,19 +576,17 @@ static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
- u32 f_host = clk_get_rate(pltfm_host->clk);
-
- if (boarddata->f_max && (boarddata->f_max < f_host))
+ if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock))
return boarddata->f_max;
else
- return f_host;
+ return pltfm_host->clock;
}
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- return clk_get_rate(pltfm_host->clk) / 256 / 16;
+ return pltfm_host->clock / 256 / 16;
}
static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
@@ -596,7 +594,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
- unsigned int host_clock = clk_get_rate(pltfm_host->clk);
+ unsigned int host_clock = pltfm_host->clock;
int pre_div = 2;
int div = 1;
u32 temp, val;
@@ -1017,7 +1015,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
}
pltfm_host->clk = imx_data->clk_per;
-
+ pltfm_host->clock = clk_get_rate(pltfm_host->clk);
clk_prepare_enable(imx_data->clk_per);
clk_prepare_enable(imx_data->clk_ipg);
clk_prepare_enable(imx_data->clk_ahb);
--
1.7.2.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
