Hi,
On 12/16/2013 11:02 AM, Maxime Ripard wrote:
Hi Hans,
Damn google-groups removed me from Cc :)
On Sun, Dec 15, 2013 at 03:31:29PM +0100, Hans de Goede wrote:
@@ -376,6 +385,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ sdc0_pins_a: sdc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <3>;
+ allwinner,pull = <1>;
Wow, you need both the pullups and a 40mA output?
Yes and no. The pullups are enabled by uboot and the allwinner
sources, most of my testing has been done without them, which
seems to work fine. I've enabled them to be consisten with the
allwinner sources and u-boot.
Henrik was suggesting that in most boards it's not required to set up
the internal pullups. Maybe we can just disable them by default, and
we will always be able to enable them at the board level if needed.
Ok, I'm fine with disabling the pull-ups by default.
As for drive = <3>, we need drive = <2> for normal modes,
and drive = <3> for ddr mode. I simply picked <3> to keep
things KISS. It should not matter much in power usage, as
it will only make the flanks of the signal more steep. Once the
desired output level is reached the current will drop off. It will
use more current when changing the level, but for half the time,
so the effective power usage (current * time) is the same.
Ok, let's keep it to 40mA then. It will indeed be simpler :)
Ack.
Ideally, I'd like this patch to be splitted into three:
- One that adds the MMC controller nodes to the DTSI
- One that adds the muxing options you need to the pinctrl node
- One that enables the controller on the boards
Sounds like a good job for David. Note I've a lot more boards for
which I would like to add mmc support or dts files in general
(will do so as time permits).
For those boards which already have a dts I'll send mmc adding dts
patches to David for now so he can add the changes to the patch-set.
How do you want to deal with new boards ? Send the addition of the
base board to you (and CC David as he will need them in his tree too),
and then send a patch to add mmc to the dts to David ?
I don't really like having a variable-sweep patch serie. Just send
your DT additions to me, saying that you depend on the MMC serie from
David.
Ok will do if / when I've dts files for new boards.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
