On Wednesday 11 December 2013, Zhangfei Gao wrote: > Add dw_mmc-k3.c for k3v2, support sd/emmc > > Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> > Tested-by: Zhigang Wang <brooke.wangzhigang@xxxxxxxxxx> > --- > .../devicetree/bindings/mmc/k3-dw-mshc.txt | 51 ++++++++ > drivers/mmc/host/Kconfig | 10 ++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-k3.c | 136 ++++++++++++++++++++ > 4 files changed, 198 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt > create mode 100644 drivers/mmc/host/dw_mmc-k3.c > > diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt > new file mode 100644 > index 000000000000..d816b89c386a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt > @@ -0,0 +1,51 @@ > +* Hisilicon specific extensions to the Synopsys Designware Mobile > + Storage Host Controller > + > +Read synopsys-dw-mshc.txt for more details > + > +The Synopsys designware mobile storage host controller is used to interface > +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents > +differences between the core Synopsys dw mshc controller properties described > +by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific > +extensions to the Synopsys Designware Mobile Storage Host Controller. > + > +Required Properties: > + > +* compatible: should be one of the following. > + - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions. > +* clk-table-num: should be number of clks in clk-table required by each mmc timing > +* clk-table: should clock list required by each mmc timing I have not seen "clk-table" and "clk-table-num" before. Are these standard properties? What are the units that are used here, what does the index mean? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
