Re: [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Rob

On Thu, Dec 5, 2013 at 10:29 PM, Rob Herring <robherring2@xxxxxxxxx> wrote:
> On Thu, Nov 7, 2013 at 11:38 PM, Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> wrote:

>> +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
>> @@ -0,0 +1,83 @@
>> +* Hisilicon specific extensions to the Synopsys Designware Mobile
>> +  Storage Host Controller
>> +
>> +Read synopsis-dw-mshc.txt for more details
>> +The Synopsys designware mobile storage host controller is used to interface
>> +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
>> +differences between the core Synopsys dw mshc controller properties described
>> +by synopsis-dw-mshc.txt and the properties used by the Hisilicon specific
>> +extensions to the Synopsys Designware Mobile Storage Host Controller.
>> +
>> +Required Properties:
>> +
>> +* compatible: should be
>> +       - "hisilicon,hi4511-dw-mshc": for controllers with hi4511
>> +         specific extentions.
>> +* reg: should be address and size of mmc controller
>
> This should be covered by the base binding.
Yes, got it.

>
>> +* vmmc-supply: should be vmmc used in dwmmc
>> +* fifo-depth: should be provided if register can not provide correct value
>> +* tuning-table: should be array to tune mmc controller, including clock rate
>> +       to be set and values for setting optional register.
>
> Please define the size and what the values mean.
>
>> +
>> +Optional properties:
>> +
>> +/* These registers from pctrl node used for tuning mmc controller if required */
>> +* clken-reg: should be clock enable register and offset bit
>> +* drv-sel-reg: should be driver delay select register, start bit and bits numbers
>> +* sam-sel-reg: should be sample delay select register, start bit and bits numbers
>> +* div-reg: should be divider register, start bit and bits numbers
>
> Do these really vary on different boards or versions of the IP? If
> not, then put this information in the kernel.
>
> Otherwise, these need better description such as number of words and
> order of values.

Double checked these registers are not used in newer version.
Will follow Arnd's suggestion to abstract in clock.

>> +
>> +       /* Board portion */
>> +       dwmmc0@fcd03000 {
>> +               num-slots = <1>;
>> +               vmmc-supply = <&ldo12>;
>> +               fifo-depth = <0x100>;
>> +               supports-highspeed;
>
> Please reference that the binding uses standard SD properties (state
> which binding document).
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt is used for
base doc describing supports-highspeed.

>
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
>> +               slot@0 {
>> +                       reg = <0>;
>> +                       bus-width = <4>;
>> +                       disable-wp;
>> +                       cd-gpios = <&gpio10 3 0>;
>> +               };
>> +       };
>> +
>> +PCTRL: Peripheral misc control register
>
> Is this only MMC control bits? Seems like this belongs in its own doc.
OK, will move out.

Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux