[PATCH v4 4/7] mmc: omap_hsmmc: adapt hsmmc to use pbias regulator

[Balaji T K <balajitk@xxxxxx>]

In DT case, PBAIS registers are programmed via regulator,
use regulator APIs to control PBIAS.

Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
 drivers/mmc/host/omap_hsmmc.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 342be25..0a390f8 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -126,6 +126,10 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
+#define VDD_1V8			1800000		/* 180000 uV */
+#define VDD_3V0			3000000		/* 300000 uV */
+#define VDD_165_195		(ffs(MMC_VDD_165_195) - 1)
+
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -164,6 +168,8 @@ struct omap_hsmmc_host {
 	 */
 	struct	regulator	*vcc;
 	struct	regulator	*vcc_aux;
+	struct	regulator	*pbias;
+	bool			pbias_enabled;
 	int			pbias_disable;
 	void	__iomem		*base;
 	resource_size_t		mapbase;
@@ -272,6 +278,15 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
 	if (mmc_slot(host).before_set_reg)
 		mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
+	if (host->pbias) {
+		if (host->pbias_enabled == 1) {
+			ret = regulator_disable(host->pbias);
+			if (!ret)
+				host->pbias_enabled = 0;
+		}
+		regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+	}
+
 	/*
 	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
@@ -306,9 +321,29 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
 		}
 	}
 
+	if (host->pbias) {
+		if (vdd <= VDD_165_195)
+			ret = regulator_set_voltage(host->pbias, VDD_1V8,
+								VDD_1V8);
+		else
+			ret = regulator_set_voltage(host->pbias, VDD_3V0,
+								VDD_3V0);
+		if (ret < 0)
+			goto error_set_power;
+
+		if (host->pbias_enabled == 0) {
+			ret = regulator_enable(host->pbias);
+			if (!ret) {
+				host->pbias_enabled = 1;
+				goto error_set_power;
+			}
+		}
+	}
+
 	if (mmc_slot(host).after_set_reg)
 		mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
 
+error_set_power:
 	return ret;
 }
 
@@ -342,6 +377,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
 	host->vcc_aux = IS_ERR(reg) ? NULL : reg;
 
+	reg = devm_regulator_get_optional(host->dev, "pbias");
+	host->pbias = IS_ERR(reg) ? NULL : reg;
+
 	/* For eMMC do not power off when not in sleep state */
 	if (mmc_slot(host).no_regulator_off_init)
 		return 0;
@@ -1808,6 +1846,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
 	host->next_data.cookie = 1;
+	host->pbias_enabled = 0;
 
 	platform_set_drvdata(pdev, host);
 
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html