Hi Morimoto-san,
Thank you for the patch.
On Thursday 14 November 2013 02:35:08 Kuninori Morimoto wrote:
> SDHI0/2 Vcc/Vccq can use gpio/fixed regulator driver
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> ---
> arch/arm/mach-shmobile/board-lager.c | 89 ++++++++++++++++++++++++++-----
> 1 file changed, 78 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-shmobile/board-lager.c
> b/arch/arm/mach-shmobile/board-lager.c index 2e529dc..7c77521 100644
> --- a/arch/arm/mach-shmobile/board-lager.c
> +++ b/arch/arm/mach-shmobile/board-lager.c
> @@ -33,7 +33,9 @@
> #include <linux/platform_data/rcar-du.h>
> #include <linux/platform_device.h>
> #include <linux/phy.h>
> +#include <linux/regulator/driver.h>
> #include <linux/regulator/fixed.h>
> +#include <linux/regulator/gpio-regulator.h>
> #include <linux/regulator/machine.h>
> #include <linux/sh_eth.h>
> #include <mach/common.h>
> @@ -154,10 +156,6 @@ static const struct gpio_keys_platform_data
> lager_keys_pdata __initconst = { static struct regulator_consumer_supply
> fixed3v3_power_consumers[] = {
> REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
> - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
> - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
> - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
> - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
> };
>
> /* MMCIF */
> @@ -185,9 +183,67 @@ static const struct resource ether_resources[]
> __initconst = { DEFINE_RES_IRQ(gic_spi(162)),
> };
>
> +/* SDHI regulator macro */
> +#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
> +static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
> + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
> + \
> +static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
> + .constraints = { \
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS, \
> + }, \
> + .consumer_supplies = &vcc_sdhi##idx##_consumer, \
> + .num_consumer_supplies = 1, \
> +}; \
> + \
> +static struct fixed_voltage_config vcc_sdhi##idx##_info = { \
> + .supply_name = "SDHI" #idx "Vcc", \
> + .microvolts = 3300000, \
> + .gpio = vdd_pin, \
> + .enable_high = 1, \
> + .init_data = &vcc_sdhi##idx##_init_data, \
> +}; \
> + \
> +static struct regulator_consumer_supply vccq_sdhi##idx##_consumer= \
> + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
> + \
> +static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
> + .constraints = { \
> + .input_uV = 3300000, \
> + .min_uV = 1800000, \
> + .max_uV = 3300000, \
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
> + REGULATOR_CHANGE_STATUS, \
> + }, \
> + .consumer_supplies = &vccq_sdhi##idx##_consumer, \
> + .num_consumer_supplies = 1, \
> +}; \
> + \
> +static struct gpio vccq_sdhi##idx##_gpio = \
> + { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
> + \
> +static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
> + { .value = 1800000, .gpios = 0 }, \
> + { .value = 3300000, .gpios = 1 }, \
> +}; \
> + \
> +static struct gpio_regulator_config vccq_sdhi##idx##_info = { \
> + .supply_name = "vqmmc", \
> + .gpios = &vccq_sdhi##idx##_gpio, \
> + .nr_gpios = 1, \
> + .states = vccq_sdhi##idx##_states, \
> + .nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
> + .type = REGULATOR_VOLTAGE, \
> + .init_data = &vccq_sdhi##idx##_init_data, \
> +};
The vmmc regulator looks fine to me at first sight, but I'm less sure about
the vqmmc regulator. The vqmmc supplies are provided by the PMIC, we should
ideally use the existing da9063 mfd driver. As this might require a
significant amount of work I'm fine with this approach as a quick fix, but I'd
like a comment in the source code stating that vqmmc should be handled by the
da9063 driver.
> +SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
> +SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
> +
> /* SDHI0 */
> static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
> - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
> + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
> + MMC_CAP_POWER_OFF_CARD,
> .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
> .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
> TMIO_MMC_WRPROTECT_DISABLE,
> @@ -200,7 +256,8 @@ static struct resource sdhi0_resources[] __initdata = {
>
> /* SDHI2 */
> static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
> - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
> + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
> + MMC_CAP_POWER_OFF_CARD,
> .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
> .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
> TMIO_MMC_WRPROTECT_DISABLE,
> @@ -259,6 +316,9 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
>
> static void __init lager_add_standard_devices(void)
> {
> + int fixed_regulator_idx = 0;
> + int gpio_regulator_idx = 0;
> +
> r8a7790_clock_init();
>
> pinctrl_register_mappings(lager_pinctrl_map,
> @@ -272,7 +332,8 @@ static void __init lager_add_standard_devices(void)
> platform_device_register_data(&platform_bus, "gpio-keys", -1,
> &lager_keys_pdata,
> sizeof(lager_keys_pdata));
> - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
> + regulator_register_always_on(fixed_regulator_idx++,
> + "fixed-3.3V", fixed3v3_power_consumers,
> ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
> platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
> mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
> @@ -285,10 +346,16 @@ static void __init lager_add_standard_devices(void)
>
> lager_add_du_device();
>
> - gpio_request_one(RCAR_GP_PIN(5, 24), GPIOF_OUT_INIT_HIGH, NULL); /* SD0
> VDD 3.3V */ - gpio_request_one(RCAR_GP_PIN(5, 25), GPIOF_OUT_INIT_HIGH,
> NULL); /* SD2 VDD 3.3V */ - gpio_request_one(RCAR_GP_PIN(5, 29),
> GPIOF_OUT_INIT_HIGH, NULL); /* SD0 VccQ 3.3V */
> - gpio_request_one(RCAR_GP_PIN(5, 30), GPIOF_OUT_INIT_HIGH, NULL); /* SD2
> VccQ 3.3V */ + platform_device_register_data(&platform_bus,
> "reg-fixed-voltage", fixed_regulator_idx++, +
&vcc_sdhi0_info,
> sizeof(struct fixed_voltage_config));
> + platform_device_register_data(&platform_bus, "reg-fixed-voltage",
> fixed_regulator_idx++, + &vcc_sdhi2_info, sizeof(struct
> fixed_voltage_config));
> +
> + platform_device_register_data(&platform_bus, "gpio-regulator",
> gpio_regulator_idx++, + &vccq_sdhi0_info, sizeof(struct
> gpio_regulator_config)); + platform_device_register_data(&platform_bus,
> "gpio-regulator", gpio_regulator_idx++, +
&vccq_sdhi2_info,
> sizeof(struct gpio_regulator_config)); +
> platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
> sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
> &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
