On 30 October 2013 15:09, Dong Aisheng <b29396@xxxxxxxxxxxxx> wrote:
> The MMC_CAP_UHS_DDR50 must work on 1.8v.
> However, the eMMC DDR mode can work on either 1.8v or 3.3v and
> should not depend on UHS_DDR50.
> So get rid of this limitation to let controller without 1.8v
> signal voltage support can also work for eMMC DDR mode if it claims.
>
> Signed-off-by: Dong Aisheng <b29396@xxxxxxxxxxxxx>
Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> ---
> drivers/mmc/core/mmc.c | 8 ++------
> 1 files changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index f631f5a..98e9eb0 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1119,14 +1119,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> */
> if (mmc_card_highspeed(card)) {
> if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
> - && ((host->caps & (MMC_CAP_1_8V_DDR |
> - MMC_CAP_UHS_DDR50))
> - == (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
> + && (host->caps & MMC_CAP_1_8V_DDR))
> ddr = MMC_1_8V_DDR_MODE;
> else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
> - && ((host->caps & (MMC_CAP_1_2V_DDR |
> - MMC_CAP_UHS_DDR50))
> - == (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
> + && (host->caps & MMC_CAP_1_2V_DDR))
> ddr = MMC_1_2V_DDR_MODE;
> }
>
> --
> 1.7.2.rc3
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
