This patch defines a quirk for platforms unable to enable HS200 support.
Signed-off-by: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
Reviewed-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 3 ++-
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7a7fb4f..ef91ad4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3002,7 +3002,8 @@ int sdhci_add_host(struct sdhci_host *host)
/* SD3.0: SDR104 is supported so (for eMMC) the caps2
* field can be promoted to support HS200.
*/
- mmc->caps2 |= MMC_CAP2_HS200;
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+ mmc->caps2 |= MMC_CAP2_HS200;
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 3e781b8..362927c4 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -98,6 +98,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
/* Controller has a non-standard host control register */
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
+/* Controller does not support HS200 */
+#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
