On Thu, Oct 17, 2013 at 6:56 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote: > On Wed, Oct 16, 2013 at 10:47:06PM +0100, Tim Kryger wrote: >> Rather than declaring the frequency of the external clock, specify the >> label of the clock such that the driver may determine the frequency on >> its own. > > Nit: we're not specifying the label of the clock. Clocks are represented > py a phand+args pair, and the important part is that we're specifying > the clock itself. > > How about something like: > > ---->8---- > Currently the rate of the external clock input to "snps,dw-apb-uart" > devices is described by a clock-frequency property rather than by > reference to the clock itself. > > This patch changes the "snps,dw-apb-uart" entries in bcm11351.dtsi to > refer to the parent clock directly, following the common clock bindings. > ---->8---- Would this be acceptable? The frequency property in "snps,dw-apb-uart" entries are no longer required if the rate of the external clock can be determined using the clk api (see e302cd9 serial: 8250_dw: add support for clk api). This patch replaces the frequency property in the UART nodes of bcm11351.dtsi with references to the relevant clocks following the common clock binding. > > Also, this should probably be moved after the driver change, so as to > not be unbootable temporarily. The driver change was part of v3.10 so there is no issue here. > > Thanks, > Mark. > >> >> Signed-off-by: Tim Kryger <tim.kryger@xxxxxxxxxx> >> Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx> >> Reviewed-by: Matt Porter <matt.porter@xxxxxxxxxx> >> --- >> arch/arm/boot/dts/bcm11351.dtsi | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi >> index c6464fb..ce65367 100644 >> --- a/arch/arm/boot/dts/bcm11351.dtsi >> +++ b/arch/arm/boot/dts/bcm11351.dtsi >> @@ -43,7 +43,7 @@ >> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; >> status = "disabled"; >> reg = <0x3e000000 0x1000>; >> - clock-frequency = <13000000>; >> + clocks = <&uartb_clk>; >> interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; >> reg-shift = <2>; >> reg-io-width = <4>; >> @@ -53,7 +53,7 @@ >> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; >> status = "disabled"; >> reg = <0x3e001000 0x1000>; >> - clock-frequency = <13000000>; >> + clocks = <&uartb2_clk>; >> interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; >> reg-shift = <2>; >> reg-io-width = <4>; >> @@ -63,7 +63,7 @@ >> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; >> status = "disabled"; >> reg = <0x3e002000 0x1000>; >> - clock-frequency = <13000000>; >> + clocks = <&uartb3_clk>; >> interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; >> reg-shift = <2>; >> reg-io-width = <4>; >> @@ -73,7 +73,7 @@ >> compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; >> status = "disabled"; >> reg = <0x3e003000 0x1000>; >> - clock-frequency = <13000000>; >> + clocks = <&uartb4_clk>; >> interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; >> reg-shift = <2>; >> reg-io-width = <4>; >> -- >> 1.8.0.1 >> >> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
