The auto cmd settings bits should be cleared before sending new commands or we may receive command timeout error for normal commands due to wrongly pre-sent auto cmd. e.g. we receive CMD13 timeout error due to ACMD23 is wrongly enabled by former data commands. mmc2: new high speed DDR MMC card at address 0001 mmcblk1: mmc2:0001 SEM08G 7.39 GiB mmcblk1boot0: mmc2:0001 SEM08G partition 1 2.00 MiB mmcblk1boot1: mmc2:0001 SEM08G partition 2 2.00 MiB mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB mmcblk1: p1 p2 p3 p4 < p5 p6 p7 > mmc2: Timeout waiting for hardware interrupt. mmcblk1boot1: unknown partition table mmc2: Timeout waiting for hardware interrupt. mmcblk1boot0: unknown partition table Signed-off-by: Dong Aisheng <b29396@xxxxxxxxxxxxx> --- drivers/mmc/host/sdhci.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a21a710..f868e9b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -898,6 +898,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, u16 mode; struct mmc_data *data = cmd->data; + /* clear Auto CMD settings for no data CMDs */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | + SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); + if (data == NULL) return; -- 1.7.2.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
