On Thursday 17 October 2013 08:55 PM, Mark Rutland wrote:
On Thu, Oct 17, 2013 at 11:53:48AM +0100, Balaji T K wrote:
On Thursday 17 October 2013 02:08 PM, Mark Rutland wrote:
On Wed, Oct 16, 2013 at 04:18:22PM +0100, Balaji T K wrote:
From: Sekhar Nori <nsekhar@xxxxxx>
add generic "non-removable" binding support for omap_hsmmc
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 2 +-
drivers/mmc/host/omap_hsmmc.c | 3 +++
2 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 8c8908a..3b95719 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -17,7 +17,7 @@ Optional properties:
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
-ti,non-removable: non-removable slot (like eMMC)
+ti,non-removable: non-removable eMMC with always on vccq and configurable vcc
Why this change?
Hi,
earlier ti,non-removable was used for all eMMC and SDIO card, now it will
be used only for eMMC with always on vccq and configurable vcc.
Please expand the commit message to mention this. It wasn't clear why
adding support for a property meant modifying the description of
another.
Hi,
Ok
What do "vccq" and "vcc" correspond to? The regulators are called "vmmc"
and "vmmc_aux"...
vccq and vcc are supply names of eMMC part
The binding has vmmc-supply and vmmc_aux-supply. How do {vmmc,vmmc_aux}
and {vcc,vccq} relate? That should be clarified in the binding document,
something like:
- vmmc-supply: phandle of the regulator for the VCC input
- vmmc_aux-supply: phandle of the regulator for the VCCQ input
It can be different for SD card, so will add vcc to vmmc mapping to ti,non-removable
description.
Why is no mention of "non-removable" added, given that it's added to the
code?
Because this file makes a reference to mmc.txt and the core properties described
by mmc.txt are not added in ti-omap-hsmmc.txt
There is room for confusion here. While "non-removable" is a generic
property, it would be good to contrast "non-removable" and
"ti,non-removable" in the binding as they imply different things.
Is one preferred over the other? That should be noted.
ti,needs-special-reset: Requires a special softreset sequence
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
dmas: List of DMA specifiers with the controller specific format
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..5992048 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1738,6 +1738,9 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
pdata->slots[0].switch_pin = cd_gpio;
pdata->slots[0].gpio_wp = wp_gpio;
+ if (of_find_property(np, "non-removable", NULL)) {
+ pdata->slots[0].nonremovable = true;
+ }
This wasn't mentioned in the binding, and it seems to have different
semantics to "ti,non-removable". Why is it different?
When ti,non-removable was added, Only OMAP platform that had eMMC was that on OMAP4
where power to eMMC cannot be switched off without sending CMD5 sleep command,
so no_regulator_off_init was needed to get it detected during boot.
Now start using generic non-removable for all removable cards which do not
have such limitation.
OK. I think this would be much clearer with something in the binding
contrasting the two properties.
Thanks for comments, will add those info.
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
