[PATCH 8/8] sdhci: Use jiffies instead of a timeout counter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just a cosmetic change, should not affect functionality.

Patch based on: http://thread.gmane.org/gmane.linux.kernel.mmc/2579.

Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxx>
Signed-off-by: Jeremie Samuel <jeremie.samuel.ext@xxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c |   22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 843e99d..3e148c0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -209,17 +209,16 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 	}
 
 	/* Wait max 100 ms */
-	timeout = 100;
+	timeout = jiffies + msecs_to_jiffies(100);
 
 	/* hw clears the bit when it's done */
 	while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
-		if (timeout == 0) {
+		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Reset 0x%x never completed.\n",
 				mmc_hostname(host->mmc), (int)mask);
 			sdhci_dumpregs(host);
 			return;
 		}
-		timeout--;
 		msleep(1);
 	}
 
@@ -995,7 +994,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	WARN_ON(host->cmd);
 
 	/* Wait max 10 ms */
-	timeout = 10;
+	timeout = jiffies + msecs_to_jiffies(10);
 
 	mask = SDHCI_CMD_INHIBIT;
 	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
@@ -1007,7 +1006,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		mask &= ~SDHCI_DATA_INHIBIT;
 
 	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
-		if (timeout == 0) {
+		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Controller never released "
 				"inhibit bit(s).\n", mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
@@ -1015,7 +1014,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 			schedule_work(&host->finish_work);
 			return;
 		}
-		timeout--;
 		mdelay(1);
 	}
 
@@ -1228,16 +1226,15 @@ clock_set:
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
 	/* Wait max 20 ms */
-	timeout = 20;
+	timeout = jiffies + msecs_to_jiffies(20);
 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 		& SDHCI_CLOCK_INT_STABLE)) {
-		if (timeout == 0) {
+		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Internal clock never "
 				"stabilised.\n", mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
 			return;
 		}
-		timeout--;
 		msleep(1);
 	}
 
@@ -1902,12 +1899,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
 	 * of loops reaches 40 times or a timeout of 150ms occurs.
 	 */
-	timeout = 150;
+	timeout = jiffies + msecs_to_jiffies(150);
 	do {
 		struct mmc_command cmd = {0};
 		struct mmc_request mrq = {NULL};
 
-		if (!tuning_loop_counter && !timeout)
+		if (!tuning_loop_counter && time_after(jiffies, timeout))
 			break;
 
 		cmd.opcode = opcode;
@@ -1978,7 +1975,6 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		tuning_loop_counter--;
-		timeout--;
 		msleep(1);
 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);
 
@@ -1986,7 +1982,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * The Host Driver has exhausted the maximum number of loops allowed,
 	 * so use fixed sampling frequency.
 	 */
-	if (!tuning_loop_counter || !timeout) {
+	if (!tuning_loop_counter || time_after(jiffies, timeout)) {
 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 	} else {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux