Re: [PATCH] rename ARCH_BCM to ARCH_BCM_MOBILE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 20, 2013 at 4:04 PM, Christian Daudt <csd@xxxxxxxxxxxx> wrote:
> Currently ARCH_BCM has been used for Broadcom
> Mobile V7 based SoCs. In order to allow other Broadcom
> SoCs to also use mach-bcm directory and files, this patch
> renames the original ARCH_BCM to ARCH_BCM_MOBILE, and
> uses ARCH_BCM to define any Broadcom chip residing
> in mach-bcm directory.
>
> Signed-off-by: Christian Daudt <csd@xxxxxxxxxxxx>
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cc0f1fb..dd00e22 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -42,8 +42,6 @@ dtb-$(CONFIG_ARCH_AT91)       += sama5d34ek.dtb
>  dtb-$(CONFIG_ARCH_AT91)        += sama5d35ek.dtb
>
>  dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
> -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
> -       bcm28155-ap.dtb
>  dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
>         da850-evm.dtb
>  dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
> @@ -101,6 +99,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
>         kirkwood-ts219-6282.dtb \
>         kirkwood-openblocks_a6.dtb
>  dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
> +dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
> +       bcm28155-ap.dtb

This reordering looks off. The entries should be alphabetically
ordered, so if anything it should move up above BCM2835.


> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 704d6d3..4207ab4 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -25,7 +25,7 @@ obj-$(CONFIG_SUN4I_TIMER)     += sun4i_timer.o
>  obj-$(CONFIG_ARCH_TEGRA)       += tegra20_timer.o
>  obj-$(CONFIG_VT8500_TIMER)     += vt8500_timer.o
>  obj-$(CONFIG_ARCH_NSPIRE)      += zevio-timer.o
> -obj-$(CONFIG_ARCH_BCM)         += bcm_kona_timer.o
> +obj-$(CONFIG_ARCH_BCM_MOBILE)  += bcm_kona_timer.o
>  obj-$(CONFIG_CADENCE_TTC_TIMER)        += cadence_ttc_timer.o
>  obj-$(CONFIG_CLKSRC_EXYNOS_MCT)        += exynos_mct.o
>  obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)       += samsung_pwm_timer.o
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 7fc5099..7e89650 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -251,7 +251,7 @@ config MMC_SDHCI_S3C_DMA
>
>  config MMC_SDHCI_BCM_KONA
>         tristate "SDHCI support on Broadcom KONA platform"
> -       depends on ARCH_BCM
> +       depends on ARCH_BCM_MOBILE
>         select MMC_SDHCI_PLTFM
>         help
>           This selects the Broadcom Kona Secure Digital Host Controller

Since nothing breaks (i.e. ARCH_BCM is still there, and will be
enabled for any ARCH_BCM_MOBILE platform), the above two can go
through the corresponding subsystem trees as separate patches.


With the above fixed:

Acked-by: Olof Johansson <olof@xxxxxxxxx>



-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux