[PATCH 0/3] Add support for SD/MMC on SOCFPGA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dinh Nguyen <dinguyen@xxxxxxxxxx>

Hi,

Here is a patch series that enables SD/MMC support for the SOCFPGA platform.
This is the 6th revision of the series. This series is intended for v3.13.

v6:
- Reuse "samsung,dw-mshc-sdr-timing" binding
- Clean up dw_mmc-socfpga.c to have only the necessary functions
	- Remove dw_mci_socfpga_parse_dt(), as we'll let the platform function:
		socfpga_sysmgr_set_dwmmc_drvsel_smpsel() do that work
	- Always use SDMMC_CMD_USE_HOLD_REG
- Add mach-socfpga/system_mgr.c, which contains function that will set the
  SD/MMC SDR values in the System Manager.
- Expose an API function in the mach-socfpga platform code so that the SD/MMC
  driver can use to set the SDR values.

I know that there's a general rule not to have drivers access specific
function(s) in platform code, but for this case I am really unsure of what
would be the best solution. The system manager IP block itself does not warrant
a driver, so a "syscon" driver should suffice. However, there are specific
register offsets that are needed, these can be defined in either in the SD/MMC 
or DTS entry. But in order for the DTS entries to be correct, it would need register 
offset information as well. And I was informed that register offsets were frowned 
upon in the past.
   
So for this go-around, I am exposing an API from the mach-socfpga platform
code that will only be used by a platform-specific implementation of the SD/MMC
driver.

v5:
- Add "altr,ciu-clk-offset" that represents the necessary offset
	and shift values in the sysmgr phandle. This is used to set
	the correct CIU clock values.
    
v4:
- Add a complete binding example in documentations
- Add a phandle entry for "altr,sysmgr" which links the system
	manager to the SD/MMC IP block that controls the SDR timings.
- Split up patches
	1/3 - Add syscon binding to sys-mgr node
	2/3 - DTS bindings and documentation for SD/MMC on SOCFPGA
	3/3 - Driver changes to use the bindings
    
v3:
- Explicitly reference synopsis-dw-mshc.txt for base bindings
- Remove "dw-mshc-ciu-div" as driver can get clock information dts "ciu" entry
- Fixed indentation issue
    
v2:
- Remove bus-width and extra line in documentation
- Merge bindings example into a single node in documentation


Dinh Nguyen (3):
  arm: socfpga: Set the SDMMC clock phase in system manager
  mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific functionality
  arm: dts: socfpga: Add support for SD/MMC

 .../devicetree/bindings/mmc/socfpga-dw-mshc.txt    |   38 ++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |   11 ++++
 arch/arm/boot/dts/socfpga_cyclone5.dts             |   12 ++++
 arch/arm/boot/dts/socfpga_vt.dts                   |   12 ++++
 arch/arm/mach-socfpga/Makefile                     |    2 +-
 arch/arm/mach-socfpga/core.h                       |    6 ++
 arch/arm/mach-socfpga/system_mgr.c                 |   32 ++++++++++
 drivers/mmc/host/dw_mmc-pltfm.h                    |    2 +-
 drivers/mmc/host/dw_mmc-socfpga.c                  |   63 +-------------------
 9 files changed, 115 insertions(+), 63 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
 create mode 100644 arch/arm/mach-socfpga/system_mgr.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux