On Tue, September 03, 2013, Ulf Hansson wrote:
> On 26 August 2013 09:20, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> > While speed mode is changed, CMD13 cannot be guaranteed.
> > According to the spec., it is not recommended to use CMD13
> > to check the busy completion of the timing change.
> > If CMD13 is used in this case, CRC error must be ignored.
> >
> > Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> > ---
> > Change in v2:
> > - Removed function declaration.(From Ulf Hansson)
> >
> > drivers/mmc/core/mmc_ops.c | 70 ++++++++++++++++++++++++++-----------------
> > 1 files changed, 42 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> > index ef18348..1464c1e 100644
> > --- a/drivers/mmc/core/mmc_ops.c
> > +++ b/drivers/mmc/core/mmc_ops.c
> > @@ -23,6 +23,40 @@
> >
> > #define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
> >
> > +static inline int __mmc_send_status(struct mmc_card *card, u32 *status,
> > + bool ignore_crc)
>
> Is there any specific reason to you made this function inline?
First, when considering that mmc_send_status() just wraps __mmc_send_status(),
we can reduce call stack though it seems trivial.
And __mmc_send_status() will be used only in 'mmc_ops.c'. Currently it is called
in do~while loop. inline function could be helpful to avoid frequent call.
>
> > +{
> > + int err;
> > + struct mmc_command cmd = {0};
> > +
> > + BUG_ON(!card);
> > + BUG_ON(!card->host);
> > +
> > + cmd.opcode = MMC_SEND_STATUS;
> > + if (!mmc_host_is_spi(card->host))
> > + cmd.arg = card->rca << 16;
> > + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
> > + if (ignore_crc)
> > + cmd.flags &= ~MMC_RSP_CRC;
> > +
> > + err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
> > + if (err)
> > + return err;
> > +
> > + /* NOTE: callers are required to understand the difference
> > + * between "native" and SPI format status words!
> > + */
> > + if (status)
> > + *status = cmd.resp[0];
> > +
> > + return 0;
> > +}
> > +
> > +int mmc_send_status(struct mmc_card *card, u32 *status)
> > +{
> > + return __mmc_send_status(card, status, false);
> > +}
> > +
> > static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
> > {
> > int err;
> > @@ -380,6 +414,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
> > struct mmc_command cmd = {0};
> > unsigned long timeout;
> > u32 status;
> > + bool ignore_crc;
> >
> > BUG_ON(!card);
> > BUG_ON(!card->host);
> > @@ -408,10 +443,15 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
> > if (!use_busy_signal)
> > return 0;
> >
> > - /* Must check status to be sure of no errors */
> > + /*
> > + * Must check status to be sure of no errors
> > + * If CMD13 is to check the busy completion of the timing change,
> > + * disable the check of CRC error.
> > + */
> > + ignore_crc = (index == EXT_CSD_HS_TIMING) ? true : false;
>
> You need to consider MMC_CAP_WAIT_WHILE_BUSY in the condition for
> "ignore_crc" as well. Otherwise you will ignore CRC in cases where we
> actually can detect it.
Ok, it would be good.
Thanks,
Seungwon Jeon
>
> Kind regards
> Ulf Hansson
>
>
> > timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
> > do {
> > - err = mmc_send_status(card, &status);
> > + err = __mmc_send_status(card, &status, ignore_crc);
> > if (err)
> > return err;
> > if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
> > @@ -449,32 +489,6 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
> > }
> > EXPORT_SYMBOL_GPL(mmc_switch);
> >
> > -int mmc_send_status(struct mmc_card *card, u32 *status)
> > -{
> > - int err;
> > - struct mmc_command cmd = {0};
> > -
> > - BUG_ON(!card);
> > - BUG_ON(!card->host);
> > -
> > - cmd.opcode = MMC_SEND_STATUS;
> > - if (!mmc_host_is_spi(card->host))
> > - cmd.arg = card->rca << 16;
> > - cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
> > -
> > - err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
> > - if (err)
> > - return err;
> > -
> > - /* NOTE: callers are required to understand the difference
> > - * between "native" and SPI format status words!
> > - */
> > - if (status)
> > - *status = cmd.resp[0];
> > -
> > - return 0;
> > -}
> > -
> > static int
> > mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
> > u8 len)
> > --
> > 1.7.0.4
> >
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
