Re: [RFC V2 1/4] mmc: dw_mmc: exynos: move the exynos private init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Yuvaraj,

On 08/26/2013 06:20 PM, Yuvaraj Kumar wrote:
> On Fri, Aug 23, 2013 at 7:14 PM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
>> Hi Yuvaraj,
>>
>> On 08/23/2013 08:15 PM, Yuvaraj Kumar C D wrote:
>>> Currently platform specific private data initialisation is done by
>>> dw_mci_exynos_priv_init and dw_mci_exynos_parse_dt.As we already have
>>> separate platform specific device tree parser dw_mci_exynos_parse_dt,
>>> move the dw_mci_exynos_priv_init code to dw_mci_exynos_parse_dt.
>>> We can use the dw_mci_exynos_priv_init to do some actual platform
>>> specific initialisation of SMU and etc.
>>>
>>> changes since V1: none
>>>
>>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
>>> ---
>>>  drivers/mmc/host/dw_mmc-exynos.c |   31 +++++++++++++++----------------
>>>  1 file changed, 15 insertions(+), 16 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
>>> index 9990f98..19c845b 100644
>>> --- a/drivers/mmc/host/dw_mmc-exynos.c
>>> +++ b/drivers/mmc/host/dw_mmc-exynos.c
>>> @@ -72,22 +72,8 @@ static struct dw_mci_exynos_compatible {
>>>
>>>  static int dw_mci_exynos_priv_init(struct dw_mci *host)
>>>  {
>>> -     struct dw_mci_exynos_priv_data *priv;
>>> -     int idx;
>>> -
>>> -     priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
>>> -     if (!priv) {
>>> -             dev_err(host->dev, "mem alloc failed for private data\n");
>>> -             return -ENOMEM;
>>> -     }
>>> -
>>> -     for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
>>> -             if (of_device_is_compatible(host->dev->of_node,
>>> -                                     exynos_compat[idx].compatible))
>>> -                     priv->ctrl_type = exynos_compat[idx].ctrl_type;
>>> -     }
>>> +     struct dw_mci_exynos_priv_data *priv = host->priv;
>>>
>>> -     host->priv = priv;
>>>       return 0;
>>>  }
>>>
>>> @@ -177,12 +163,24 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>>>
>>>  static int dw_mci_exynos_parse_dt(struct dw_mci *host)
>>>  {
>>> -     struct dw_mci_exynos_priv_data *priv = host->priv;
>>> +     struct dw_mci_exynos_priv_data *priv;
>>>       struct device_node *np = host->dev->of_node;
>>>       u32 timing[2];
>>>       u32 div = 0;
>>> +     int idx;
>>>       int ret;
>>>
>>> +     priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
>>> +     if (!priv) {
>>> +             dev_err(host->dev, "mem alloc failed for private data\n");
>>> +             return -ENOMEM;
>>> +     }
>>> +
>>> +     for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
>>> +             if (of_device_is_compatible(np, exynos_compat[idx].compatible))
>>> +                     priv->ctrl_type = exynos_compat[idx].ctrl_type;
>>> +     }
>>> +
>>>       of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
>>>       priv->ciu_div = div;
>>>
>>> @@ -199,6 +197,7 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
>>>               return ret;
>>>
>>>       priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
>>> +     host->priv = priv;
>>
>> I'm not sure whether my thinking is right or not.
>> if host->pdata is present, then dw_mci_parse_dt() didn't called at dw_mci_probe.
> Yes, you are right.
>> then how host->priv set to priv?
> Earlier host->priv set to priv in both non-DT and DT case.True, with
> this patch it does it only in DT case.
> Is there any platform/board which still uses dw_mmc and its platform
> extension driver with non DT case?
You're right. i didn't see the extension driver with non DT-case?
Then we can also modify the host->pdata into dw_mci_probe().

Best Regards,
Jaehoon Chung
> I found a reference of non-DT case where host->pdata is present in
> dw_mmc-pci.c driver but does not
> use platform extension driver (exynos/socfpga).
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>       return 0;
>>>  }
>>>
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux