Chris et al,
with 3.11-rc6 and the Broadcom BCM57765 card reader [1] in my Macbook
Retina, interrupts are not seen during card insertion:
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA
[...]
mmc0: Timeout waiting for hardware interrupt.
However /proc/interrupts shows 4 interrupts occurring at insertion time:
17: 6 0 0 0 0 0
0 0 IO-APIC-fasteoi mmc0
Debugging shows the interrupt handler inspecting the state of the
hardware and finding no work to do; are the missing regulators
unexpected?
--- [1]
$ sudo lspci -s 03:00.1 -v
03:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765
Memory Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 96bc
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at c1820000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel
Kernel driver in use: sdhci-pci
--
Daniel J Blueman
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
