Re: [PATCHv5 2/3] ARM: socfpga: dts: Add support for SD/MMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/23/2013 09:44 AM, dinguyen@xxxxxxxxxx wrote:
> From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> 
> Add bindings for SD/MMC for SOCFPGA.

> diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt

> +* altr,sysmgr: Should be the phandle to the system_mgr node. As this is where
> +		this where the register that controls the CIU clock phases
> +		reside.
> +
> +* altr,ciu-clk-offset: The order of the cells should be:
> +	- First Cell: Offset of the register in the system_mgr node that controls
> +		the smpsel bits.
> +	- Second Cell: Shift value of the drvsel bits.
> +	- Third Cell: Shift value of the smpsel bits.

This almost solves the issues I was thinking of. A few more thoughts though:

* What if the sysmgr node has multiple reg entries. Is the offset cell
in altr,ciu-clk-offset an offset from the first reg entry, or across all
reg entries? It might be better to specify this as a reg index plus
offset, or allow the sysmgr node to define the format (#sysmgr-cells
perhaps).

* What if the drvsel and smpsel bits are in different registers, even
different sysmgr blocks? Wouldn't it be better to have 2 separate
properties, each one defining the location of one bit-field?

* bikeshed: altr,ciu-clk-offset isn't a great name; the value is more
than just an offset.

Putting those together, I might expect the following properties:

sysmgr: sysmgr {
    /* binding for sysmgr node must specify what those 3 cells are */
    #sysmgr-cells = <3>;
}

dwmmc {
    altr,drvsel-reg-field = <
        &sysmgr /* sysmgr phandle */
        0 /* reg index */
        0 /* reg offset */
        0 /* field bit position */
        3 /* field bit size */>;
    altr,smpsel-reg-field = <
        &sysmgr /* sysmgr phandle */
        0 /* reg index */
        0 /* reg offset */
        3 /* field bit position */
        3 /* field bit size */>;
};

That would allow the whole sysmgr concept to be completely generic.

But, this is a bit like representing raw register I/O in DT, which has
been frowned upon in the past.

Finally, what if the values for drvsel, smpsel are different in
different sysmgr implementations? Do you need a property that defines
that values?

Another option might be to define a semantic API between the two, such
that you only need a sysmgr=<&sysmgr> property, yet the driver for the
sysmgr node exposes a function sysmgr_set_dwmmc_drvsel_smpsel(struct
device_node *sysmgr_node, uint drvsel, uint smpsel); Now, the sysmgr
driver would have to implement that on any SoC that supported a dwmmc.

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux